Paste.ee

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2018.02.28 21:29:30 =~=~=~=~=~=~=~=~=~=~=~=
HELO
33.16208-1.0.38-116.140

CPU0
PMBS
AFEL
PWRZ
MEML
APMT
PMCD
L1CD
MMUI
CODE
ZBBS
MAIN
DRAM
NVRAM memcfg 0x327

MCB chksum 0xf65f52a5

DDR3-1600 CL11 256MB


MemsysInit lpe2_custom 0p10 20140709


DDR3


80711BD8 80003000 00000070 014028BC


MCB rev=0x00020201 Ref ID=0x028BC Sub Bld=0x014


ZQ Cal LP PHY


 p_term=0x06 n_term=0x06 p_drive=0x11 n_drive=0x10


PLL Ref(Hz)=0x02FAF080 UI STEPS=0x047


 DDR CLK(MHz)=0x31F WL CLK dly(ps)=0x0C8 bitT(ps)=0x271 VDLsize(fs)=0x2262 CLK_VDL=0x01F


Changed Byte Lane LDE


Changed Byte Lane LDE


Add/Ctl Alignment

no adjustment

memsys_init call phy init returns 0x00000000

MEMC init size 1 clock 6


MemsysInit lpe2_custom 0p10 20140709


DDR3


80711BD8 80003000 000003E0 014028BC


MCB rev=0x00020201 Ref ID=0x028BC Sub Bld=0x014


SHMOO 28nm 0p9 20140709


80003000 80002500 00000000 00020000 00000000


ROSC Auto clk counter start

Found inflection point

ROSC final result:

nRing Osc Meas check

rosc 0x00 = 0x000000AD clk_count = 0x00000575 scb_clk = 0x0064 MHz

rosc 0x01 = 0x000000C1 clk_count = 0x00000575 scb_clk = 0x0064 MHz

rosc 0x02 = 0x000000B6 clk_count = 0x00000575 scb_clk = 0x0064 MHz

rosc 0x03 = 0x000000E4 clk_count = 0x00000575 scb_clk = 0x0064 MHz

rosc 0x04 = 0x000000B1 clk_count = 0x00000575 scb_clk = 0x0064 MHz

rosc 0x05 = 0x000000FE clk_count = 0x00000575 scb_clk = 0x0064 MHz

rosc 0x06 = 0x00000093 clk_count = 0x00000575 scb_clk = 0x0064 MHz

rosc 0x07 = 0x0000005E clk_count = 0x00000575 scb_clk = 0x0064 MHz

rosc 0x08 = 0x000000E1 clk_count = 0x00000575 scb_clk = 0x0064 MHz

rosc 0x09 = 0x000000B3 clk_count = 0x00000575 scb_clk = 0x0064 MHz

rosc 0x0A = 0x0000007B clk_count = 0x00000575 scb_clk = 0x0064 MHz

rosc 0x0B = 0x000000B5 clk_count = 0x00000575 scb_clk = 0x0064 MHz


ROSC Auto clk counter finished

One UI Steps : 0x52


Shmoo WL


   0000000000111111111122222222223333333333444444444455555555556666666666777777777788


   0123456789012345678901234567890123456789012345678901234567890123456789012345678901


00 S-------------------------------------------------X+++++++++++++++++++++++++++++++


01 S---------------------------------------X+++++++++++++++++++++++++++++++++++++++++


Using passive Rd Data Delay 


SET RD DATA DELAY 0x800034B0 = 0x00000006


SET RD DATA DELAY 0x800036B0 = 0x00000006


Shmoo RD En


Initial:  WL Cyc=0x0 ODT Delay=0x0 ODT PreLen=0x2


Post:     WL Cyc=0x0 ODT Delay=0x0 ODT PreLen=0x2


Initial:  WL Cyc=0x0 ODT Delay=0x0 ODT PreLen=0x2


Post:     WL Cyc=0x0 ODT Delay=0x0 ODT PreLen=0x2


B0 RISE UI=1 VDL=0B PICK UI=2 VDL=0B


B1 RISE UI=1 VDL=15 PICK UI=2 VDL=15


   0000000000111111111122222222223333333333444444444455555555556666666666777777777788


   0123456789012345678901234567890123456789012345678901234567890123456789012345678901


00 --S--------X++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++


01 --S------------------X++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++


Rd Dat Dly


6 ++


5 ++


4 ++


3 ++


2 --


Converged RD-DAT-DLY = 2


 BL0 Final RD-DAT-DLY = 4


 BL1 Final RD-DAT-DLY = 4


Shmoo RD DQ NP


DQS :


B0 VDL=47 ok


B1 VDL=47 ok


   0000000000111111111122222222223333333333444444444455555555556666666666777777777788


   0123456789012345678901234567890123456789012345678901234567890123456789012345678901


00 ------------++++++++++++++++++++++++++++X++++++++++++++++++++++++++++-------------


01 --------------+++++++++++++++++++++++++++X++++++++++++++++++++++++++++------------


02 --------------+++++++++++++++++++++++++++X++++++++++++++++++++++++++++------------


03 --------------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++----------


04 ----------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++--------------


05 ----------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++--------------


06 --------------++++++++++++++++++++++++++++X++++++++++++++++++++++++++++-----------


07 ----------------++++++++++++++++++++++++++X+++++++++++++++++++++++++++------------


08 -------------+++++++++++++++++++++++++++X++++++++++++++++++++++++++++-------------


09 ------------------++++++++++++++++++++++++++X+++++++++++++++++++++++++++----------


10 -----------++++++++++++++++++++++++++++X++++++++++++++++++++++++++++--------------


11 ----------------+++++++++++++++++++++++++++X++++++++++++++++++++++++++++----------


12 --------------+++++++++++++++++++++++++++X++++++++++++++++++++++++++++------------


13 ------------------++++++++++++++++++++++++++X+++++++++++++++++++++++++++----------


14 --------------+++++++++++++++++++++++++++X++++++++++++++++++++++++++++------------


15 ------------------+++++++++++++++++++++++++++X++++++++++++++++++++++++++++--------


Shmoo RD DQ P


   0000000000111111111122222222223333333333444444444455555555556666666666777777777788


   0123456789012345678901234567890123456789012345678901234567890123456789012345678901


00 -+++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++-------------


01 ---+++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++------------


02 ----++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++------------


03 ----+++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++----------


04 +++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++--------------


05 +++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++--------------


06 ---+++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++-----------


07 ---+++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++------------


08 ++++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++-------------


09 -----+++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++----------


10 +++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++--------------


11 ----+++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++----------


12 ---+++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++------------


13 ------++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++----------


14 --+++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++------------


15 ------+++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++--------


Shmoo RD DQ N


   0000000000111111111122222222223333333333444444444455555555556666666666777777777788


   0123456789012345678901234567890123456789012345678901234567890123456789012345678901


00 ------------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++------------


01 ---------------+++++++++++++++++++++++++++X++++++++++++++++++++++++++++-----------


02 ---------------+++++++++++++++++++++++++++X++++++++++++++++++++++++++++-----------


03 ---------------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++---------


04 ----------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++--------------


05 ----------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++--------------


06 -------------+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++----------


07 ---------------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++---------


08 -------------+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++----------


09 -----------------++++++++++++++++++++++++++++X++++++++++++++++++++++++++++--------


10 ------------+++++++++++++++++++++++++++X++++++++++++++++++++++++++++--------------


11 ----------------+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++-------


12 ---------------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++------------


13 -----------------++++++++++++++++++++++++++++X++++++++++++++++++++++++++++--------


14 -------------++++++++++++++++++++++++++++X++++++++++++++++++++++++++++------------


15 -----------------+++++++++++++++++++++++++++X++++++++++++++++++++++++++++---------


Shmoo WR DQ


   0000000000111111111122222222223333333333444444444455555555556666666666777777777788


   0123456789012345678901234567890123456789012345678901234567890123456789012345678901


00 ----+++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++--------------


01 -------++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++--------------


02 ------++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++--------------


03 --------+++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++-----------


04 ---+++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++----------------


05 -++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++----------------


06 -------+++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++-----------


07 --------++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++---------


08 -++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++----------------


09 ------++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++-----------


10 -+++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++------------------


11 -----+++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++----------


12 ---++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++--------------


13 ------++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++-----------


14 ---++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++--------------


15 ----+++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++-----------


Shmoo WR DM


WR DM


   0000000000111111111122222222223333333333444444444455555555556666666666777777777788


   0123456789012345678901234567890123456789012345678901234567890123456789012345678901


00 -------+++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++-------


01 ------+++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++---------


memsys_init call shmoo returns 0x00000000

PASS
FPS0
BT94
0009
BT95
0500
NAN3
RFS2
NAN5


CFE version 1.0.38-116.140 for BCM963138 (32bit,SP,LE)
Build Date: 2015年 09月 21日 星期一 12:51:42 CST ([email protected])
Copyright (C) 2000-2013 Broadcom Corporation.

Chip ID: BCM63139B0, ARM Cortex A9 Dual Core: 1000MHz
Total Memory: 268435456 bytes (256MB)
Status wait timeout: nandsts=0x70000000 mask=0x40000000, count=0
NAND ECC BCH-4, page size 0x800 bytes, spare size used 64 bytes
NAND flash device: Micron MT29F1G08AAC, id 0x2cf1 block 128KB size 131072KB
pmc_init:PMC using PMB_DIRECT mode
nvram break to cfe flag is 1
pTag is valid, tag 1 info: 
A06014, 33.162L.12, 63138
Board IP address                  : 192.168.1.1:ffffff00  
Host IP address                   : 192.168.1.100  
Gateway IP address                :   
Run from flash/host/tftp (f/h/c)  : f  
Default host run file name        : vmlinux  
Default host flash file name      : bcm963xx_fs_kernel  
Boot delay (0-9 seconds)          : 1  
Boot image (0=latest, 1=previous) : 0  
Default host ramdisk file name    :   
Default ramdisk store address     :   
Board Id (0-17)                   : R3000  
Number of MAC Addresses (1-32)    : 16  
Base MAC Address                  : 4c:8b:30:b8:a8:a0  
PSI Size (1-64) KBytes            : 64  
Enable Backup PSI [0|1]           : 1  
System Log Size (0-256) KBytes    : 256  
Board Serial Number               : CRXA5400102787  
Factory FW Version                : 33.162L.08  
Console Access Permission [0|1]   : 0  
MC memory allocation (MB)         : 4  
TM memory allocation (MB)         : 20  
WLan Feature                      : 0x00  

This is one CFE built for BELLALIANT R3000H
WANTYPE = 0 
pmc_switch_power_up: Rgmii Tx clock zone1 enable 0 zone2 enable 0. 

 LINK DOWN IMP Port 
Creating CPU ring for queue number 0 with 32 packets descriptor=0x00f5c5fc
 Done initializing Ring 0 Base=0x42a1ba40K End=0x42a1bc40K calculated entries= 32 RDD Base=0x02a1ba40K descriptor=0x00f5c5fc
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 110
Booting from latest image (address 0x03d80000, flash offset 0x03d80000) ...
Decompression OK!
Entry at 0x00008000
Closing network.
Starting program at 0x00008000
Booting Linux on physical CPU 0

Linux version 3.4.11-rt19 ([email protected]) (gcc version 4.6.2 (Buildroot 2011.11) ) #1 SMP PREEMPT Mon Sep 21 12:55:17 CST 2015

CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d

CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

Machine: BCM963138

bootconsole [earlycon0] enabled

Memory policy: ECC disabled, Data cache writealloc

creatiing a MT_MEMORY_NONCACHED device at physical address of 0x0fe00000 to virtual address at 0xcfe00000 with size of 0x200000 byte for DSL

creatiing a MT_MEMORY_NONCACHED device at physical address of 0x0ea00000 to virtual address at 0xcea00000 with size of 0x1400000 byte for RDPA tm

creatiing a MT_MEMORY_NONCACHED device at physical address of 0x0e600000 to virtual address at 0xce600000 with size of 0x400000 byte for RDPA mc

On node 0 totalpages: 58880

free_area_init_node: node 0, pgdat c048ade0, node_mem_map c1000000

  DMA zone: 32 pages used for memmap

  DMA zone: 0 pages reserved

  DMA zone: 4064 pages, LIFO batch:0

  Normal zone: 480 pages used for memmap

  Normal zone: 54304 pages, LIFO batch:15

pmc_init:PMC using PMB_DIRECT mode

L310 cache controller enabled

l2x0: 16 ways, CACHE_ID 0x410000c9, AUX_CTRL 0x6a450000, Cache size: 524288 B

PERCPU: Embedded 7 pages/cpu @c1204000 s5408 r8192 d15072 u32768

pcpu-alloc: s5408 r8192 d15072 u32768 alloc=8*4096

pcpu-alloc: [0] 0 [0] 1 

Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 58368

Kernel command line: console=ttyS0,115200 console=clog0,crashlog earlyprintk debug

PID hash table entries: 1024 (order: 0, 4096 bytes)

Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

Memory: 230MB = 230MB total

Memory: 228324k/228324k available, 33820k reserved, 0K highmem

Virtual kernel memory layout:

    vector  : 0xffff0000 - 0xffff1000   (   4 kB)

    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

    vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)

    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)

    modules : 0xbf000000 - 0xc0000000   (  16 MB)

      .text : 0xc0008000 - 0xc04326ec   (4266 kB)

      .init : 0xc0433000 - 0xc0456520   ( 142 kB)

      .data : 0xc0458000 - 0xc048b940   ( 207 kB)

       .bss : 0xc048b964 - 0xc04bd2e8   ( 199 kB)

Preemptible hierarchical RCU implementation.

	Dump stacks of tasks blocking RCU-preempt GP.

NR_IRQS:256

Cortex A9 MPCORE GIC init

DIST at fc01f000, CPU_IF at fc01e100

sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms

Booting Linux on physical CPU 0

Linux version 3.4.11-rt19 ([email protected]) (gcc version 4.6.2 (Buildroot 2011.11) ) #1 SMP PREEMPT Mon Sep 21 12:55:17 CST 2015

CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d

CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

Machine: BCM963138

bootconsole [earlycon0] enabled

Memory policy: ECC disabled, Data cache writealloc

creatiing a MT_MEMORY_NONCACHED device at physical address of 0x0fe00000 to virtual address at 0xcfe00000 with size of 0x200000 byte for DSL

creatiing a MT_MEMORY_NONCACHED device at physical address of 0x0ea00000 to virtual address at 0xcea00000 with size of 0x1400000 byte for RDPA tm

creatiing a MT_MEMORY_NONCACHED device at physical address of 0x0e600000 to virtual address at 0xce600000 with size of 0x400000 byte for RDPA mc

On node 0 totalpages: 58880

free_area_init_node: node 0, pgdat c048ade0, node_mem_map c1000000

  DMA zone: 32 pages used for memmap

  DMA zone: 0 pages reserved

  DMA zone: 4064 pages, LIFO batch:0

  Normal zone: 480 pages used for memmap

  Normal zone: 54304 pages, LIFO batch:15

pmc_init:PMC using PMB_DIRECT mode

L310 cache controller enabled

l2x0: 16 ways, CACHE_ID 0x410000c9, AUX_CTRL 0x6a450000, Cache size: 524288 B

PERCPU: Embedded 7 pages/cpu @c1204000 s5408 r8192 d15072 u32768

pcpu-alloc: s5408 r8192 d15072 u32768 alloc=8*4096

pcpu-alloc: [0] 0 [0] 1 

Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 58368

Kernel command line: console=ttyS0,115200 console=clog0,crashlog earlyprintk debug

PID hash table entries: 1024 (order: 0, 4096 bytes)

Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

Memory: 230MB = 230MB total

Memory: 228324k/228324k available, 33820k reserved, 0K highmem

Virtual kernel memory layout:

    vector  : 0xffff0000 - 0xffff1000   (   4 kB)

    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

    vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)

    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)

    modules : 0xbf000000 - 0xc0000000   (  16 MB)

      .text : 0xc0008000 - 0xc04326ec   (4266 kB)

      .init : 0xc0433000 - 0xc0456520   ( 142 kB)

      .data : 0xc0458000 - 0xc048b940   ( 207 kB)

       .bss : 0xc048b964 - 0xc04bd2e8   ( 199 kB)

Preemptible hierarchical RCU implementation.

	Dump stacks of tasks blocking RCU-preempt GP.

NR_IRQS:256

Cortex A9 MPCORE GIC init

DIST at fc01f000, CPU_IF at fc01e100

sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms

console [ttyS0] enabled

console [ttyS0] enabled

Calibrating delay loop... Calibrating delay loop... 1993.93 BogoMIPS (lpj=9969664)

1993.93 BogoMIPS (lpj=9969664)

pid_max: default: 32768 minimum: 301

pid_max: default: 32768 minimum: 301

Mount-cache hash table entries: 512

Mount-cache hash table entries: 512

--Kernel Config--

--Kernel Config--

  SMP=1

  SMP=1

  PREEMPT=1

  PREEMPT=1

  DEBUG_SPINLOCK=0

  DEBUG_SPINLOCK=0

  DEBUG_MUTEXES=0

  DEBUG_MUTEXES=0

CPU: Testing write buffer coherency: CPU: Testing write buffer coherency: ok

ok

Broadcom Logger v0.1 Sep 21 2015 12:52:17

Broadcom Logger v0.1 Sep 21 2015 12:52:17

Setting up static identity map for 0x32cd98 - 0x32cdcc

Setting up static identity map for 0x32cd98 - 0x32cdcc

CPU1: Booted secondary processor

CPU1: Booted secondary processor

CPU1: Unknown IPI message 0x1

CPU1: Unknown IPI message 0x1

Brought up 2 CPUs

Brought up 2 CPUs

SMP: Total of 2 processors activated (3987.86 BogoMIPS).

SMP: Total of 2 processors activated (3987.86 BogoMIPS).

NET: Registered protocol family 16

NET: Registered protocol family 16

bcm63xx_pcie: applying serdes parameters

bcm63xx_pcie: applying serdes parameters

PCIE port 0 link-up

PCIE port 0 link-up

PCI host bridge to bus 0000:00

PCI host bridge to bus 0000:00

pci_bus 0000:00: root bus resource [mem 0x90000000-0x9fffffff]

pci_bus 0000:00: root bus resource [mem 0x90000000-0x9fffffff]

pci 0000:00:00.0: [14e4:6313] type 01 class 0x060400

pci 0000:00:00.0: [14e4:6313] type 01 class 0x060400

pci 0000:00:00.0: PME# supported from D0 D3hot

pci 0000:00:00.0: PME# supported from D0 D3hot

PCI: bus0: Fast back to back transfers disabled

PCI: bus0: Fast back to back transfers disabled

pci 0000:01:00.0: [1bb5:0008] type 00 class 0x028000

pci 0000:01:00.0: [1bb5:0008] type 00 class 0x028000

pci 0000:01:00.0: reg 10: [mem 0x00000000-0x0000ffff pref]

pci 0000:01:00.0: reg 10: [mem 0x00000000-0x0000ffff pref]

pci 0000:01:00.0: reg 18: [mem 0x00000000-0x0000ffff pref]

pci 0000:01:00.0: reg 18: [mem 0x00000000-0x0000ffff pref]

pci 0000:01:00.0: reg 1c: [mem 0x00000000-0x0000ffff pref]

pci 0000:01:00.0: reg 1c: [mem 0x00000000-0x0000ffff pref]

pci 0000:01:00.0: supports D1

pci 0000:01:00.0: supports D1

pci 0000:01:00.0: PME# supported from D0 D1 D3hot

pci 0000:01:00.0: PME# supported from D0 D1 D3hot

PCI: bus1: Fast back to back transfers disabled

PCI: bus1: Fast back to back transfers disabled

pci 0000:00:00.0: BAR 9: assigned [mem 0x90000000-0x900fffff pref]

pci 0000:00:00.0: BAR 9: assigned [mem 0x90000000-0x900fffff pref]

pci 0000:01:00.0: BAR 0: assigned [mem 0x90000000-0x9000ffff pref]

pci 0000:01:00.0: BAR 0: assigned [mem 0x90000000-0x9000ffff pref]

pci 0000:01:00.0: BAR 2: assigned [mem 0x90010000-0x9001ffff pref]

pci 0000:01:00.0: BAR 2: assigned [mem 0x90010000-0x9001ffff pref]

pci 0000:01:00.0: BAR 3: assigned [mem 0x90020000-0x9002ffff pref]

pci 0000:01:00.0: BAR 3: assigned [mem 0x90020000-0x9002ffff pref]

pci 0000:00:00.0: PCI bridge to [bus 01-01]

pci 0000:00:00.0: PCI bridge to [bus 01-01]

pci 0000:00:00.0:   bridge window [mem 0x90000000-0x900fffff pref]

pci 0000:00:00.0:   bridge window [mem 0x90000000-0x900fffff pref]

PCI: enabling device 0000:00:00.0 (0140 -> 0143)

PCI: enabling device 0000:00:00.0 (0140 -> 0143)

bcm63xx_pcie: applying serdes parameters

bcm63xx_pcie: applying serdes parameters

PCIE port 1 link-up

PCIE port 1 link-up

PCI host bridge to bus 0001:00

PCI host bridge to bus 0001:00

pci_bus 0001:00: root bus resource [mem 0xa0000000-0xafffffff]

pci_bus 0001:00: root bus resource [mem 0xa0000000-0xafffffff]

pci 0001:00:00.0: [14e4:6313] type 01 class 0x060400

pci 0001:00:00.0: [14e4:6313] type 01 class 0x060400

pci 0001:00:00.0: PME# supported from D0 D3hot

pci 0001:00:00.0: PME# supported from D0 D3hot

PCI: bus0: Fast back to back transfers disabled

PCI: bus0: Fast back to back transfers disabled

pci 0001:01:00.0: [14e4:43bb] type 00 class 0x028000

pci 0001:01:00.0: [14e4:43bb] type 00 class 0x028000

pci 0001:01:00.0: reg 10: [mem 0x00000000-0x00007fff 64bit]

pci 0001:01:00.0: reg 10: [mem 0x00000000-0x00007fff 64bit]

pci 0001:01:00.0: reg 18: [mem 0x00000000-0x003fffff 64bit]

pci 0001:01:00.0: reg 18: [mem 0x00000000-0x003fffff 64bit]

pci 0001:01:00.0: supports D1 D2

pci 0001:01:00.0: supports D1 D2

pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold

pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold

PCI: bus1: Fast back to back transfers disabled

PCI: bus1: Fast back to back transfers disabled

pci 0001:00:00.0: BAR 8: assigned [mem 0xa0000000-0xa05fffff]

pci 0001:00:00.0: BAR 8: assigned [mem 0xa0000000-0xa05fffff]

pci 0001:01:00.0: BAR 2: assigned [mem 0xa0000000-0xa03fffff 64bit]

pci 0001:01:00.0: BAR 2: assigned [mem 0xa0000000-0xa03fffff 64bit]

pci 0001:01:00.0: BAR 0: assigned [mem 0xa0400000-0xa0407fff 64bit]

pci 0001:01:00.0: BAR 0: assigned [mem 0xa0400000-0xa0407fff 64bit]

pci 0001:00:00.0: PCI bridge to [bus 01-01]

pci 0001:00:00.0: PCI bridge to [bus 01-01]

pci 0001:00:00.0:   bridge window [mem 0xa0000000-0xa05fffff]

pci 0001:00:00.0:   bridge window [mem 0xa0000000-0xa05fffff]

PCI: enabling device 0001:00:00.0 (0140 -> 0143)

PCI: enabling device 0001:00:00.0 (0140 -> 0143)

bio: create slab <bio-0> at 0

bio: create slab <bio-0> at 0

console [clog0] enabled, bootconsole disabled

console [clog0] enabled, bootconsole disabled

SCSI subsystem initialized

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

bcmhs_spi bcmhs_spi.1: master is unqueued, this is deprecated

skbFreeTask created successfully

[0;34mBLOG v3.0 Initialized[0m

BLOG Rule v1.0 Initialized

Broadcom IQoS v0.1 Sep 21 2015 12:55:00 initialized

Broadcom GBPM v0.1 Sep 21 2015 12:55:00 initialized

Switching to clocksource timer_cs

NET: Registered protocol family 2

IP route cache hash table entries: 2048 (order: 1, 8192 bytes)

TCP established hash table entries: 8192 (order: 4, 65536 bytes)

TCP bind hash table entries: 8192 (order: 4, 98304 bytes)

TCP: Hash tables configured (established 8192 bind 8192)

TCP: reno registered

UDP hash table entries: 128 (order: 0, 4096 bytes)

UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)

NET: Registered protocol family 1

squashfs: version 4.0 (2009/01/31) Phillip Lougher

jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.

fuse init (API version 7.18)

msgmni has been set to 445

io scheduler noop registered (default)

brd: module loaded

loop: module loaded

Broadcom NAND controller (BrcmNand Controller)

mtd->oobsize=0, mtd->eccOobSize=0

NAND_CS_NAND_XOR=00000000

B4: NandSelect=40000001, nandConfig=25152300, chipSelect=0

brcmnand_read_id: CS0: dev_id=2cf18095

After: NandSelect=00000001, nandConfig=25152300

Block size=00020000, erase shift=17

NAND Config: Reg=25152300, chipSize=128 MB, blockSize=128K, erase_shift=11

busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff

timing1 not adjusted: 65644458

timing2 not adjusted: 80000e56

BrcmNAND mfg 2c f1 MICRON MT29F1G08ABA 128MB on CS0


Found NAND on CS0: ACC=c3040010, cfg=25152300, flashId=2cf18095, tim1=65644458, tim2=80000e56

BrcmNAND version = 0x80000700 128MB @00000000

brcmnand_scan: B4 nand_select = 00000001

brcmnand_scan: After nand_select = 00000001

handle_acc_control: default CORR ERR threshold  3 bits

ACC: 16 OOB bytes per 512B ECC step; from ID probe: 16

page_shift=11, bbt_erase_shift=17, chip_shift=27, phys_erase_shift=17

Brcm NAND controller version = 7.0 NAND flash size 128MB @18000000

ECC layout=brcmnand_oob_bch4_2k

brcmnand_scan:  mtd->oobsize=64

brcmnand_scan: oobavail=35, eccsize=512, writesize=2048

brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=4, eccbytes=7

-->brcmnand_default_bbt

brcmnand_default_bbt: bbt_td = bbt_slc_bch4_main_descr

Bad block table Bbt0 found at page 0000ffc0, version 0x01 for chip on CS0

Bad block table 1tbB found at page 0000ff80, version 0x01 for chip on CS0

brcmnand_reset_corr_threshold: default CORR ERR threshold  3 bits for CS0

***** Found UBIFS Marker at 0x0421ff00

***** Found UBIFS Marker at 0x004bff00

Creating 10 MTD partitions on "brcmnand.0":

0x000004220000-0x000007ae0000 : "rootfs"

0x0000004c0000-0x000003d80000 : "rootfs_update"

0x000007b00000-0x000007f00000 : "data"

0x000000000000-0x000000020000 : "nvram"

0x000003e80000-0x000007ae0000 : "image"

0x000000120000-0x000003d80000 : "image_update"

0x000003d80000-0x000003e80000 : "tag"

0x000000020000-0x000000120000 : "tag_update"

0x000003e80000-0x000004220000 : "bootfs"

0x000000120000-0x0000004c0000 : "bootfs_update"

UBI: attaching mtd0 to ubi0

UBI: physical eraseblock size:   131072 bytes (128 KiB)

UBI: logical eraseblock size:    126976 bytes

UBI: smallest flash I/O unit:    2048

UBI: VID header offset:          2048 (aligned 2048)

UBI: data offset:                4096

UBI: max. sequence number:       2

UBI: attached mtd0 to ubi0

UBI: MTD device name:            "rootfs"

UBI: MTD device size:            56 MiB

UBI: number of good PEBs:        454

UBI: number of bad PEBs:         0

UBI: number of corrupted PEBs:   0

UBI: max. allowed volumes:       128

UBI: wear-leveling threshold:    4096

UBI: number of internal volumes: 1

UBI: number of user volumes:     1

UBI: available PEBs:             0

UBI: total number of reserved PEBs: 454

UBI: number of PEBs reserved for bad PEB handling: 4

UBI: max/mean erase counter: 1/0

UBI: image sequence number:  0

UBI: background thread "ubi_bgt0d" started, PID 258

tun: Universal TUN/TAP device driver, 1.6

tun: (C) 1999-2004 Max Krasnyansky <[email protected]>

PPP generic driver version 2.4.2

PPP BSD Compression module registered

PPP Deflate Compression module registered

NET: Registered protocol family 24

i2c /dev entries driver

brcmboard: brcm_board_init entry

SES: Button Interrupt 0x2 is enabled

SES: LED GPIO 0x8018 is enabled

DYING GASP IRQ initialized 

Serial: BCM63XX driver $Revision: 3.00 $

ttyS0 at MMIO 0xfffe8600 (irq = 64) is a BCM63XX

ttyS1 at MMIO 0xfffe8620 (irq = 65) is a BCM63XX

BPM: tot_mem_size=268435456B (256MB), buf_mem_size <15%> =40265310B (38MB), num of buffers=19972, buf size=2016

Broadcom BPM Module Char Driver v0.1 Sep 21 2015 12:52:35 Registered<244>[0m

GACT probability NOT on

Mirror/redirect action on

u32 classifier

    input device check on

    Actions configured

TCP: cubic registered

Initializing XFRM netlink socket

NET: Registered protocol family 10

IPv6 over IPv4 tunneling driver

NET: Registered protocol family 17

NET: Registered protocol family 15

Initializing MCPD Module

Ebtables v2.0 registered

ebt_time registered

ebt_ftos registered

ebt_wmm_mark registered

8021q: 802.1Q VLAN Support v1.8

UBIFS: mounted UBI device 0, volume 0, name "rootfs_ubifs"

UBIFS: mounted read-only

UBIFS: file system size:   55234560 bytes (53940 KiB, 52 MiB, 435 LEBs)

UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)

UBIFS: media format:       w4/r0 (latest is w4/r0)

UBIFS: default compressor: zlib

UBIFS: reserved for root:  0 bytes (0 KiB)

VFS: Mounted root (ubifs filesystem) readonly on device 0:10.

Freeing init memory: 140K


init started: BusyBox v1.17.2 (2015-07-13 17:48:34 CST)

starting pid 296, tty '': '/bin/sh -l -c "bcm_boot_launcher start"'
Mounting filesystems...
jffs2: Empty flash at 0x000b61f0 ends at 0x000b6800

Configuring system...
Loading drivers and kernel modules... 

rdpa: module license 'Proprietary' taints kernel.

Disabling lock debugging due to kernel taint

kerSysScratchPadGet wan type - GBE 

kerSysScratchPadGet wan emac - EMAC0 

ddr_tm_base_address 0xcea00000, size 20971520/20971520, ddr_tm_base_address_phys 0x0ea00000

ddr_multicast_base_address 0xce600000, size 4194304/4194304, ddr_multicast_base_address_phys 0x0e600000

WANTYPE = 1 

++++Runner gso_desc_pool created successfully

pmc_switch_power_up: Rgmii Tx clock zone1 enable 0 zone2 enable 0. 

cat: can't open '/dev/rgs_logger': No such device or address
brcmchipinfo: brcm_chipinfo_init entry

NBUFF v1.0 Initialized

[0;36;44mInitialized fcache state[0m

[0;36;44mBroadcom Packet Flow Cache  Char Driver v2.2 Sep 21 2015 12:52:36 Registered<242>[0m

Created Proc FS /procfs/fcache

[0;36;44mBroadcom Packet Flow Cache registered with netdev chain[0m

[0;36;44mBroadcom Packet Flow Cache learning via BLOG enabled.[0m

[0;35m[FHW]  pktDbgLvl[0xbf145ae4]=0[0m

[0;34m[FHW]  fhw_construct: [0m

[0;36;44mInitialized Fcache HW accelerator layer state[0m

flwStatsThread created

[0;36;44mConstructed Broadcom Packet Flow Cache v2.2 Sep 21 2015 12:52:36[0m

Initialized Runner Unicast Layer

Initialized Runner Multicast Layer

[0;36;44mBroadcom Packet Flow Cache HW acceleration enabled.[0m

Enabled Runner binding to Flow Cache

Initialized Runner Protocol Layer (700)

Broadcom Runner Blog Driver Char Driver v0.1 Sep 21 2015 12:52:37 Registered <252>

Runner Port#0 (Internal MUX Port#2) connects to Crossbar Port#1

Switch Port#3 (Internal MUX Port#0) connects to Crossbar Port#4

Unused MUX Internal Port#1 connects to Crossbar External Port#0

Cross Bar MUX Config : Internal Port 00 maps to External Port 04 <reg_val : 0x0000000c>

Cross Bar MUX Config : Internal Port 01 maps to External Port 00 <reg_val : 0x00000004>

Cross Bar MUX Config : Internal Port 02 maps to External Port 01 <reg_val : 0x00000044>

Broadcom BCM63139B0 Ethernet Network Device v0.1 Sep 21 2015 12:54:43

dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered 

++++ disabling GSO on logical_port=0 dev=ewan0

ewan0: <Int sw port: 0> <Logical : 00> PHY_ID <0x0007f00c : 0x0c> MAC : 4C:8B:30:B8:A8:A0

eth0: <Ext sw port: 0> <Logical : 08> PHY_ID <0x0007f008 : 0x08> MAC : 4C:8B:30:B8:A8:A0

eth1: <Ext sw port: 1> <Logical : 09> PHY_ID <0x0007f009 : 0x09> MAC : 4C:8B:30:B8:A8:A0

eth2: <Ext sw port: 2> <Logical : 10> PHY_ID <0x0007f00a : 0x0a> MAC : 4C:8B:30:B8:A8:A0

eth3: <Ext sw port: 3> <Logical : 11> PHY_ID <0x0007f00b : 0x0b> MAC : 4C:8B:30:B8:A8:A0

Ethernet Auto Power Down and Sleep: Enabled

Cross bar port 1 of Int switch port 0; Adv capability change : MII=0x01e1, GMII=0x0f00

Ext switch port 0; Adv capability change : MII=0x01e1, GMII=0x0f00

Ext switch port 1; Adv capability change : MII=0x01e1, GMII=0x0f00

Ext switch port 2; Adv capability change : MII=0x01e1, GMII=0x0f00

Cross bar port 4 of Ext switch port 3; Adv capability change : MII=0x01e1, GMII=0x0f00

Creating CPU ring for queue number 4 with 512 packets descriptor=0xbf0eda88

 Done initializing Ring 4 Base=0xffdf0000 End=0xffdf2000 calculated entries= 512 RDD Base=0x00c0c000 descriptor=0xbf0eda88

Creating CPU ring for queue number 3 with 512 packets descriptor=0xbf0eda5c

 Done initializing Ring 3 Base=0xffdec000 End=0xffdee000 calculated entries= 512 RDD Base=0x00c10000 descriptor=0xbf0eda5c

NComm TMS V6.80 Kernel Module loaded.

libata version 3.00 loaded.

++++ Powering up SATA block

writing PORT0_SATA3_PCB_BLOCK_ADDR

INFO: PLL lock for port0 detected 9100...

ahci: SSS flag set, parallel bus scan disabled

ahci strict-ahci.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode

ahci strict-ahci.0: flags: 64bit ncq sntf stag clo pmp slum part 

scsi0 : ahci_platform

ata1: SATA max UDMA/133 mmio [mem 0x8000a000-0x8000bfff] port 0x100 irq 77

ata1: SATA link down (SStatus 0 SControl 300)

ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

++++ Powering up USB blocks

xhci-hcd xhci-hcd.0: xHCI Host Controller

xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1

xhci-hcd xhci-hcd.0: irq 106, io mem 0x8000d000

xHCI xhci_add_endpoint called for root hub

xHCI xhci_check_bandwidth called for root hub

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 0 ports detected

xhci-hcd xhci-hcd.0: xHCI Host Controller

xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2

xHCI xhci_add_endpoint called for root hub

xHCI xhci_check_bandwidth called for root hub

hub 2-0:1.0: USB hub found

hub 2-0:1.0: 2 ports detected

ehci-platform ehci-platform.0: Generic Platform EHCI Controller

ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 3

ehci-platform ehci-platform.0: irq 105, io mem 0x8000c300

ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00

hub 3-0:1.0: USB hub found

hub 3-0:1.0: 2 ports detected

ohci-platform ohci-platform.0: Generic Platform OHCI Controller

ohci-platform ohci-platform.0: new USB bus registered, assigned bus number 4

ohci-platform ohci-platform.0: irq 104, io mem 0x8000c400

hub 4-0:1.0: USB hub found

hub 4-0:1.0: 2 ports detected

usbcore: registered new interface driver usblp

Initializing USB Mass Storage driver...

usbcore: registered new interface driver usb-storage

USB Mass Storage support registered.

[1m[34mWifi Forwarding Driver is initialized![0m

Initializing WLCSM Module

WLCSM Module loaded successfully 

dhd_module_init in

dhd_queue_budget = 256

dhd_sta_threshold = 1024

no wifi platform data, skip

PCI_PROBE:  bus 1, slot 0,vendor 14E4, device 43BB(good PCI location)

PCI: enabling device 0001:01:00.0 (0140 -> 0142)

DHD: dongle ram size is set to 983040(orig 983040) at 0x180000

dhd_attach: wl0: pre-allocated buffer mode is enabled (allocskbsz=2048)

dhd_attach: wl0: watermark total is 12981

dhd_attach(): thread:dhd_watchdog_thread:21e started

dhd_attach(): thread:dhd_dpc:21f started

dhd_deferred_work_init: work queue initialized 

Creating CPU ring for queue number 8 with 1024 packets descriptor=0xbf0edb38

 Done initializing Ring 8 Base=0xffde0000 End=0xffde4000 calculated entries= 1024 RDD Base=0x00c18000 descriptor=0xbf0edb38

Interrupt coalescing enabled for ring 8. ic_timeout 500 ic_maxpktcnt 32

[1m[34m wfd_bind: Dev wl%d wfd_idx 0 Type fkb configured WFD CPU RxQId (8), status (0) number_of_queues 1 qmask 0x1[0m

Dongle Host Driver, version 7.14.43.21.cpe33.162L16.0-kdb

Compiled in drivers/net/wireless/bcmdhd on Sep 21 2015 at 12:54:22

dhdpcie_download_code_file: download firmware /etc/wlan/dhd/43602a1/rtecdc.bin

wl: reading /etc/wlan/bcmcmn_nvramvars.bin, file size=20

wl: reading /etc/wlan/bcm43602_nvramvars.bin, file size=20

dhdpcie_bus_write_vars: Download, Upload and compare of NVRAM succeeded.

PCIe shared addr read took 226383 usec before dongle is ready

DMA RX offset from shared Area 0

bus->txmode_push is set to 0

ring_info_raw: 56 

f8 a0 26 00 88 a9 26 00 a0 ab 26 00 b8 ad 26 00 

c4 ad 26 00 00 00 00 00 00 00 00 00 00 00 00 00 

00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 

00 00 00 00 86 00 00 00 

max H2D queues 134

dhd_bus_start: Initializing 134 flowrings

dhd_bus_cmn_writeshared:

  0000: 00 00 2c 09 00 00 00 00 

dhd_bus_cmn_writeshared:

  0000: 00 20 21 09 00 00 00 00 

dhd_bus_cmn_writeshared:

  0000: 00 a0 1e 09 00 00 00 00 

dhd_bus_cmn_writeshared:

  0000: 00 c0 2b 09 00 00 00 00 

dhd_bus_cmn_writeshared:

  0000: 00 60 1f 09 00 00 00 00 

dhd_bus_cmn_writeshared:

  0000: 00 80 1f 09 00 00 00 00 

dhd_bus_cmn_writeshared:

  0000: c0 77 2b 09 

dhd_bus_cmn_writeshared:

  0000: 08 00 00 00 

mac: 6 

4c 8b 30 b8 a8 a1 

CONSOLE: hndarm_armr addr: 0x18002000, cr4_idx: 0

CONSOLE: 000000.001 

CONSOLE: RTE (PCIE-MSG_BUF) 7.10.274.18 (r501173) on BCM43602 r1 @ 40.0/160.0/160.0MHz

CONSOLE: 000000.019 allocating a max of 255 rxcplid buffers

CONSOLE: 000000.020 pciemsgbuf0: Broadcom PCIE MSGBUF driver

CONSOLE: 000000.040 reclaim section 0: Returned 47642 bytes to the heap

CONSOLE: 000000.193 wl0: Broadcom BCM43602 802.11 Wireless Controller 7.10.274.18 (r501173)

CONSOLE: 000000.193 TCAM: 256 used: 124 exceed:0

CONSOLE: 000000.194 reclaim section 1: Returned 123292 bytes to the heap

CONSOLE: 

--SMP support

wl: dsl_tx_pkt_flush_len=338

wl: norm_wmark_tot=12981, pktc_wmark_tot=12981

Broadcom 802.1Q VLAN Interface, v0.1

RDPA Speed Service Command Driver

RDPA DS WAN UDP Filter Command Driver

watchdog init_module() called

parent cap:512, dev cap:256

Setting MPS to 128

PCI: enabling device 0000:01:00.0 (0144 -> 0146)

PCIe MSI Interrupt enabling failed. Fall back to Legacy IRQ

PCIe Legacy Interrupt Enabled

qdpc_map_sysctl_regs() Mapping sysctl

BAR:0 vaddr=0xd0c40000 busaddr=90000000 offset=0 len=65536

qdpc_map_epmem() Mapping epmem

BAR:2 vaddr=0xd0c60000 busaddr=90010000 offset=0 len=65536

qdpc_map_dma_regs() Mapping dma registers

BAR:3 vaddr=0xd0c80000 busaddr=90020000 offset=0 len=65536

qdpc-host version v36.7.0.41 Quantenna Communications Inc.

Tx Descriptor table: uncache virtual addr: 0xffdde000 paddr: 0x07006000

Rx Descriptor table: uncache virtual addr: 0xffdde5a0 paddr: 0x070065a0

EP_handled_idx: uncache virtual addr: 0xffddf1a0 paddr: 0x070071a0

host0: Vmac Ethernet found

Start to monitor qtn reload. ..... 

Waiting for EP bootup... 

Starting SWMDK...
PCI memory is little endian

ENote: LoadP map start addr : 0x00000000, Host memory start : 0x00000000

Setting HOST ready...

ing 6300 MDK (default) driver for 0 chip 
Switch MDK: num_switches = 1
Switch MDK: unit = 1; phy_pbmp = 0xf; config_pbmp = 0xf Ethernet Auto Power Down and Sleep: Enabled

nophy_pbmp = 0x0
Switch MEnergy Efficient Ethernet: Enabled

DK link poll thread: unit=1; phypbmp=0xf config_pbmp=0xf
Requested DMA mask:0xbfffffff

EP FW load request...

Start download Firmware u-boot.bin...

eth3 (Ext switch port: 3) (Logical Port: 11) Link UP 100 mbps full duplex

Saving kernel bootup messages for dumpsysinfo...
Starting CMS smd...
FW Data[0]: VA:0xd0c25000 PA:0x00d00000 Sz=68980..

done!

Image. Sz:68980 State:0xc

Image downloaded....!

Start booting EP...


=====BELLALIANT R3000H  Release Version 33.162L.16 (build timestamp 150921_1256) =====

rm: can't remove '/var/dbus/messagebus.pid': No such file or directory
Initializing CMS MDM in Hybrid98+181 mode
old image is sdk10 image
Sorry, rule does not exist.
Sorry, rule does not exist.
Device "br0" does not exist.
ssk:error:16.339:rutSys_createHostsFile:981:fail to get link_local_address of Energy Efficient Ethernet changed to disabled

LAN Intf 'br0'
nvram data is not changed, needn't update nvram

ssk:error:16.365:AEI_SetTimeManual:576:manual set sntp time!!! new=2018-02-27T22:45:42+00:00
AEI_rut_getTimeZoneName index:6
ssk:error:16.372:rutSntp_restart:174:sntp start para=-d -s ntp.actiontec.com -s pool.ntp.org -s clock.isc.org -f 3600 -t Atlantic Time
no exist file [/var/autoreservation] error num [2],reason [No such file or directory]
sntp:error:16.444:main:991:[sntp.c:991]UpdateFrequency=3600
eth3 (Ext switch port: 3) (Logical Port: 11) Link DOWN.

PCI memory is little endian

DMA offset : 0x00000000, no need to reset the value.

Setting HOST ready...

Requested DMA mask:0xbfffffff

EP FW load request...

Start download Firmware topaz-linux.lzma.img...

Netfilter messages via NETLINK v0.30.

[MCPD] update igmp filter list.
br_netlink_mcpd.c: Setting registration type 0 pid to 759

ip_tables: (C) 2000-2006 Netfilter Core Team

iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
eth3 (Ext switch port: 3) (Logical Port: 11) Link UP 100 mbps full duplex

ADDRCONF(NETDEV_UP): eth0: link is not ready

netdev path : eth0.0 -> eth0

BCMVLAN : eth0 mode was set to RG

Created new Tag Rule: dev=eth0, dir=1, tags=0, id=0

Created new Tag Rule: dev=eth0, dir=1, tags=1, id=0

Created new Tag Rule: dev=eth0, dir=1, tags=2, id=device eth0.0 entered promiscuous mode

device eth0 entered promiscuous mode

0

Created new Tag Rule: dev=eth0, dibr0: port 1(eth0.0) entered forwarding state

br0: port 1(eth0.0) entered forwarding state

r=0, tags=0, id=0

Created new Tag Rule: dev=eth0, dir=0, tags=1, id=0

Created new Tag Rule: dev=eth0, dir=0, tags=2, id=0

br0: port 1(eth0.0) entered disabled state

br0: port 1(eth0.0) entered forwarding state

br0: port 1(eth0.0) entered forwarding state

ADDRCONF(NETDEV_UP): eth1: link is not ready

netdev path : eth1.0 -> eth1

BCMVLAN : eth1 mode was set to RG

Created new Tag Rule: dev=eth1, dir=1, tags=0, id=0

Created new Tag Rule: dev=eth1, dir=1, tags=1, id=0

Created new Tag Rule: dev=eth1, dir=1, tags=2, id=device eth1.0 entered promiscuous mode

device eth1 entered promiscuous mode

br0: port 2(eth1.0) entered forwarding state

br0: port 2(eth1.0) entered forwarding state

0

Created new Tag Rule: dev=eth1, dir=0, tags=0, id=0

Created new Tag Rule: dev=eth1, dir=0, tags=1, id=0

Created new Tag Rule: dev=eth1, dir=0, tags=2, id=0

br0: port 2(eth1.0) entered disabled state

br0: port 1(eth0.0) entered disabled state

br0: port 2(eth1.0) entered forwarding state

br0: port 2(eth1.0) entered forwarding state

br0: port 1(eth0.0) entered forwarding state

br0: port 1(eth0.0) entered forwarding state

ADDRCONF(NETDEV_UP): eth2: link is not ready

netdev path : eth2.0 -> eth2

BCMVLAN : eth2 mode was set to RG

Created new Tag Rule: dev=eth2, dir=1, tags=0, id=0

Created new Tag Rule: dev=eth2, dir=1, tags=1, id=0

Created new Tag Rule: dev=eth2, dir=1, tags=2, id=device eth2.0 entered promiscuous mode

device eth2 entered promiscuous mode

br0: port 3(eth2.0) entered forwarding state

br0: port 3(eth2.0) entered forwarding state

0

Created new Tag Rule: dev=eth2, dir=0, tags=0, id=0

Created new Tag Rule: dev=eth2, dir=0, tags=1, id=0

Created new Tag Rule: dev=eth2, dir=0, tags=2, id=0

br0: port 3(eth2.0) entered disabled state

br0: port 2(eth1.0) entered disabled state

br0: port 1(eth0.0) entered disabled state

br0: port 3(eth2.0) entered forwarding state

br0: port 3(eth2.0) entered forwarding state

br0: port 2(eth1.0) entered forwarding state

br0: port 2(eth1.0) entered forwarding state

br0: port 1(eth0.0) entered forwarding state

br0: port 1(eth0.0) entered forwarding state

netdev path : eth3.0 -> eth3

BCMVLAN : eth3 mode was set to RG

Created new Tag Rule: dev=eth3, dir=1, tags=0, id=0

Created new Tag Rule: dev=eth3, dir=1, tags=1, id=0

Created new Tag Rule: dedevice eth3.0 entered promiscuous mode

device eth3 entered promiscuous mode

br0: port 4(eth3.0) entered forwarding state

br0: port 4(eth3.0) entered forwarding state

v=eth3, dir=1, tags=2, id=0

Created new Tag Rule: dev=eth3, dir=0, tags=0, id=0

Created new Tag Rule: dev=eth3, dir=0, tags=1, id=0

Created new Tag Rule: dev=eth3, dir=0, tags=2, id=0

FW Data[0]: VA:0xd1892000 PA:0x00d00000 Sz=1048576..

done!

FW Data[1]: VA:0xd1992000 PA:0x00d00000 Sz=1048576..

done!

FW Data[2]: VA:0xd1a92000 PA:0x00d00000 Sz=1048576..

done!

FW Data[3]: VA:0xd1b92000 PA:0x00d00000 Sz=1048576..

done!

FW Data[4]: VA:0xd1c92000 PA:0x00d00000 Sz=75231..

done!

Image. Sz:4269535 State:0xc

Image downloaded....!

Start booting EP...

br0: port 4(eth3.0) entered disabled state

br0: port 3(eth2.0) entered disabled state

br0: port 2(eth1.0) entered disabled state

br0: port 1(eth0.0) entered disabled state

br0: port 4(eth3.0) entered forwarding state

br0: port 4(eth3.0) entered forwarding state

br0: port 3(eth2.0) entered forwarding state

br0: port 3(eth2.0) entered forwarding state

br0: port 2(eth1.0) entered forwarding state

br0: port 2(eth1.0) entered forwarding state

br0: port 1(eth0.0) entered forwarding state

br0: port 1(eth0.0) entered forwarding state

device wl0 entered promiscuous mode

br0: port 5(wl0) entered forwarding state

br0: port 5(wl0) entered forwarding state

device wl0 left promiscuous mode

br0: port 5(wl0) entered disabled state

device wl0 entered promiscuous mode

br0: port 5(wl0) entered forwarding state

br0: port 5(wl0) entered forwarding state

interface wl1 does not exist!
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: SIOCSIFADDR: No such device
interface wl1.3 does not exist!
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: SIOCSIFADDR: No such device
ssk:error:22.832:rcl_lanAlgObject:29:switch SIP ALG to state 1
insmod nf_conntrack_sip and nf_nat_sip
nf_conntrack version 0.5.0 (1024 buckets, 8192 max)

ADDRCONF(NETDEV_UP): ewan0: link is not ready

iptables: No chain/target/match by that name.
captiveEnable=0,webActiveLogEnable=0,webSiteBlockEnable=0
[MCPD] update igmp filter list.
__ACL_MCF__POLICY__ : black=0
set NETLINK_RECV_NO_ENOBUFS
ssk:error:24.402:ssk_init:1549:dbus-daemon is ready now.

monitor task is initialized pid= 641 

ssk:error:26.431:AEI_initQosAlgNetlinkFd:7268:could not open netlink socket for alg qos
ssk:error:26.470:initWanLinkInfo_igd:500:could not get DSL intf cfg, ret=9005
ssk:error:26.470:initWanLinkInfo_igd:500:could not get DSL intf cfg, ret=9005

starting pid 1535, tty '': '-/bin/sh -l -c consoled'
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
backup_psi_number_blk=1 result=65536

PMD: Module entry!
PMD: couldn't get any msg!
PMD: couldn't get any msg!
WLmngr Daemon is running
tr69c:error:27.486:getFullPathToIpvxAddrLocked_igd:383:Could not find 172.29.29.2 in data model
tr69c:error:27.487:updateTr69cCfgInfo_igd:832:could not build full path to 172.29.29.2
killall: wlevt: no process killed
wlevt is ready for new msg...
=====>ENTER
Default....
[STUND] Will exit, STUN is not enabled....
wlmngr:error:28.635:getAdapterListFromMdm:3910:instanceId=3 is not supported! (only 1 or 2)
wlmngr:error:28.636:getAdapterListFromMdm:3910:instanceId=4 is not supported! (only 1 or 2)
wlmngr:error:28.636:getAdapterListFromMdm:3910:instanceId=5 is not supported! (only 1 or 2)
wlmngr:error:28.636:getAdapterListFromMdm:3910:instanceId=6 is not supported! (only 1 or 2)
wlmngr:error:28.636:getAdapterListFromMdm:3910:instanceId=7 is not supported! (only 1 or 2)
wlmngr:error:28.636:getAdapterListFromMdm:3910:instanceId=8 is not supported! (only 1 or 2)
WPS Device PIN = 49927931
wlctl: Unsupported
wlctl: Unsupported
< SES_LED_OFF >

EP boot successful, starting config...

CONSOLE: 000018.477 wl0: wlc_enable_probe_req: state down, deferring setting of host flags

Connection established with Target BBIC4 board

Detect EP bootup complete 

killall: hspotap: no process killed
killall: bsd: no process killed
br0: port 5(wl0) entered disabled state

wlctl: Unsupported
CONSOLE: 000018.733 wl0: wlc_enable_probe_req: state down, deferring setting of host flags

CONSOLE: 000018.765 wl0: Radio pwrsave not supported in non-mbss case yet.

CONSOLE: 000018.773 wl0: Radio pwrsave not supported in non-mbss case yet.

CONSOLE: 000018.781 wl0: Radio pwrsave not supported in non-mbss case yet.

CONSOLE: 000018.790 wl0: Radio pwrsave not supported in non-mbss case yet.

CONSOLE: 000018.801 wl0: invalid chanspec 0x1000

Setting SSID: "FibreOP787"
Setting SSID: "FibreOP787-1"
Setting SSID: "FibreOP787-2"
Setting SSID: "FibreOP787-3"
wlctl: Unsupported
wlctl: Unsupported
wlctl: Unsupported
CONSOLE: 000018.876 wl0: wlc_enable_probe_req: state down, deferring setting of host flags

CONSOLE: 000018.901 wl0: wlc_enable_probe_req: state down, deferring setting of host flags

ifconfig: wl1: error fetching interface information: Device not found
ifconfig: wl1.1: error fetching interface information: Device not found
ifconfig: wl1.2: error fetching interface information: Device not found
ifconfig: wl1.3: error fetching interface information: Device not found
ifconfig: br1: error fetching interface information: Device not found
ifconfig: br2: error fetching interface information: Device not found
ifconfig: br3: error fetching interface information: Device not found
ifconfig: br4: error fetching interface information: Device not found
ifconfig: br5: error fetching interface information: Device not found
ifconfig: br6: error fetching interface information: Device not found
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: selected channel spec: 0x100b
acsd: Adjusted channel spec: 0x100b
acsd: selected DFS-exit channel spec: 0x100b
acsd: selected channel spec: 0x100b
acsd: Adjusted channel spec: 0x100b
acsd: selected channel spec: 0x100b
br0: port 5(wl0) entered forwarding state

br0: port 5(wl0) entered forwarding state

wlctl: Unsupported
wlctl: Unsupported
br0: port 5(wl0) entered disabled state

device wl0 left promiscuous mode

br0: port 5(wl0) entered disabled state

device wl0 entered promiscuous mode

br0: port 5(wl0) entered forwarding state

br0: port 5(wl0) entered forwarding state

Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
169.254.1.2: RPC: Port mapper failure - RPC: Unable to send
169.254.1.2: RPC: Port mapper failure - RPC: Unable to send
ERROR rtd.c:159 fail to recv msg from msg bus!
ERROR rtd.c:159 fail to recv msg from msg bus!
device host0 entered promiscuous mode

br0: port 6(host0) entered forwarding state

br0: port 6(host0) entered forwarding state

add ebtables rule for QTN
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
wlmngr:error:38.136:Aei_qcsapi_get_channel:125:aei_qcsapi_get current channel fail
WARNING tr69_rut_route.c:98 Both PPPConn and IPConn are Disable!
WARNING tr69_rut_route.c:98 Both PPPConn and IPConn are Disable!
ERROR tr69_func_aei_firewall_rules.c:69 gwifname is null
wlmngr:error:38.230:Aei_QTN_Bssid_check_and_set:2329:QTN wifi0 bssid has been set done, target bssid is same with current bssid !
ip6_tables: (C) 2000-2006 Netfilter Core Team

ERROR tr69_rut_wan6.c:2182 NOT found wan connection!
ERROR tr69_rut_wan6.c:2182 NOT found wan connection!
ERROR tr69_rut_wan6.c:2182 NOT found wan connection!
ERROR tr69_rut_wan6.c:2182 NOT found wan connection!
ERROR tr69_rut_wan6.c:2182 NOT found wan connection!
ERROR tr69_rut_wan6.c:2182 NOT found wan connection!
ssk:error:40.188:AEI_LanHostUpdateAssociatedDevice:235:enter mac Addr 6e:8b:30:b8:a8:a6,body->deleteHost=0,msg->src=5007,body->active=1
qcsapi_wifi_rfenable call failed: RPC: Unable to receive; errno = Connection reset by peer
RPC: Unable to receiveqcsapi_wifi_rfenable call failed: RPC: Unable to receive; errno = Connection reset by peer
RPC: Unable to receiveqcsapi_wifi_rfenable call failed: RPC: Unable to receive; errno = Connection reset by peer
RPC: Unable to receiveqcsapi_wifi_rfenable call failed: RPC: Unable to receive; errno = Connection reset by peer
RPC: Unable to receivewlmngr:error:46.400:Aei_qcsapi_startprod_for_stateless_mode:2008:qcsapi_wifi_rfenable failed
wlmngr:error:46.400:Aei_wlmngr_quantenna_setup:1274:Aei_qcsapi_startprod_for_stateless_mode failed
ifconfig: ioctl 0x8913 failed: No such device
interface wl1 does not exist!
interface wl1 does not exist!
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: SIOCSIFADDR: No such device
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
ifconfig: ioctl 0x8913 failed: No such device
interface wl1.3 does not exist!
interface wl1.3 does not exist!
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: SIOCSIFADDR: No such device
wlctl: wl driver adapter not found
/bin/smd:error:48.246:oalMsg_receive:287:bad read, rc=-1 errno=104
/bin/smd:error:48.246:oal_processEvents:1180:error on read from fd 20 for WLMNGR-DAEMON
/bin/smd:error:48.246:collectApp:2033:WLMNGR-DAEMON (pid 1515) exited due to uncaught signal number 13
system detect qtn reboot 

deleting interface 'wl0.1' idx 1

deleting interface 'wl0.2' idx 2

deleting interface 'wl0.3' idx 3

br0: port 5(wl0) entered disabled state

device wl0 left promiscuous mode

br0: port 5(wl0) entered disabled state

dhd_detach(): thread:dhd_watchdog_thread:21e terminated OK

dhd_dpc_thread: Unexpected up_cnt 0

dhd_detach(): thread:dhd_dpc:21f terminated OK

!!!Not all buffers allocated from CTFPool are freed back,may have memory leak!!!!

Restarting system.

kerSysMipsSoftReset: called on��O
33.16208-1.0.38-116.140

CPU0
PMBS
AFEL
PWRZ
MEML
APMT
PMCD
L1CD
MMUI
CODE
ZBBS
MAIN
DRAM
NVRAM memcfg 0x327

MCB chksum 0xf65f52a5

DDR3-1600 CL11 256MB


MemsysInit lpe2_custom 0p10 20140709


DDR3


80711BD8 80003000 00000070 014028BC


MCB rev=0x00020201 Ref ID=0x028BC Sub Bld=0x014


ZQ Cal LP PHY


 p_term=0x06 n_term=0x06 p_drive=0x11 n_drive=0x10


PLL Ref(Hz)=0x02FAF080 UI STEPS=0x047


 DDR CLK(MHz)=0x31F WL CLK dly(ps)=0x0C8 bitT(ps)=0x271 VDLsize(fs)=0x2262 CLK_VDL=0x01F


Changed Byte Lane LDE


Changed Byte Lane LDE


Add/Ctl Alignment

no adjustment

memsys_init call phy init returns 0x00000000

MEMC init size 1 clock 6


MemsysInit lpe2_custom 0p10 20140709


DDR3


80711BD8 80003000 000003E0 014028BC


MCB rev=0x00020201 Ref ID=0x028BC Sub Bld=0x014


SHMOO 28nm 0p9 20140709


80003000 80002500 00000000 00020000 00000000


ROSC Auto clk counter start

Found inflection point

ROSC final result:

nRing Osc Meas check

rosc 0x00 = 0x000000A9 clk_count = 0x0000055D scb_clk = 0x0064 MHz

rosc 0x01 = 0x000000BE clk_count = 0x0000055D scb_clk = 0x0064 MHz

rosc 0x02 = 0x000000B2 clk_count = 0x0000055D scb_clk = 0x0064 MHz

rosc 0x03 = 0x000000E7 clk_count = 0x0000055D scb_clk = 0x0064 MHz

rosc 0x04 = 0x000000C0 clk_count = 0x0000055D scb_clk = 0x0064 MHz

rosc 0x05 = 0x000000FE clk_count = 0x0000055D scb_clk = 0x0064 MHz

rosc 0x06 = 0x00000096 clk_count = 0x0000055D scb_clk = 0x0064 MHz

rosc 0x07 = 0x00000064 clk_count = 0x0000055D scb_clk = 0x0064 MHz

rosc 0x08 = 0x000000E2 clk_count = 0x0000055D scb_clk = 0x0064 MHz

rosc 0x09 = 0x000000B0 clk_count = 0x0000055D scb_clk = 0x0064 MHz

rosc 0x0A = 0x0000007A clk_count = 0x0000055D scb_clk = 0x0064 MHz

rosc 0x0B = 0x000000B5 clk_count = 0x0000055D scb_clk = 0x0064 MHz


ROSC Auto clk counter finished

One UI Steps : 0x52


Shmoo WL


   0000000000111111111122222222223333333333444444444455555555556666666666777777777788


   0123456789012345678901234567890123456789012345678901234567890123456789012345678901


00 S-------------------------------------------------X+++++++++++++++++++++++++++++++


01 S---------------------------------------X+++++++++++++++++++++++++++++++++++++++++


Using passive Rd Data Delay 


SET RD DATA DELAY 0x800034B0 = 0x00000006


SET RD DATA DELAY 0x800036B0 = 0x00000006


Shmoo RD En


Initial:  WL Cyc=0x0 ODT Delay=0x0 ODT PreLen=0x2


Post:     WL Cyc=0x0 ODT Delay=0x0 ODT PreLen=0x2


Initial:  WL Cyc=0x0 ODT Delay=0x0 ODT PreLen=0x2


Post:     WL Cyc=0x0 ODT Delay=0x0 ODT PreLen=0x2


B0 RISE UI=1 VDL=0B PICK UI=2 VDL=0B


B1 RISE UI=1 VDL=15 PICK UI=2 VDL=15


   0000000000111111111122222222223333333333444444444455555555556666666666777777777788


   0123456789012345678901234567890123456789012345678901234567890123456789012345678901


00 --S--------X++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++


01 --S------------------X++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++


Rd Dat Dly


6 ++


5 ++


4 ++


3 ++


2 --


Converged RD-DAT-DLY = 2


 BL0 Final RD-DAT-DLY = 4


 BL1 Final RD-DAT-DLY = 4


Shmoo RD DQ NP


DQS :


B0 VDL=47 ok


B1 VDL=47 ok


   0000000000111111111122222222223333333333444444444455555555556666666666777777777788


   0123456789012345678901234567890123456789012345678901234567890123456789012345678901


00 ------------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++------------


01 --------------+++++++++++++++++++++++++++X++++++++++++++++++++++++++++------------


02 --------------++++++++++++++++++++++++++++X++++++++++++++++++++++++++++-----------


03 --------------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++----------


04 -----------++++++++++++++++++++++++++++X++++++++++++++++++++++++++++--------------


05 ----------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++--------------


06 -------------+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++----------


07 --------------++++++++++++++++++++++++++++X++++++++++++++++++++++++++++-----------


08 -------------+++++++++++++++++++++++++++X++++++++++++++++++++++++++++-------------


09 ------------------++++++++++++++++++++++++++X+++++++++++++++++++++++++++----------


10 -----------++++++++++++++++++++++++++++X++++++++++++++++++++++++++++--------------


11 ----------------+++++++++++++++++++++++++++X++++++++++++++++++++++++++++----------


12 --------------+++++++++++++++++++++++++++X++++++++++++++++++++++++++++------------


13 -----------------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++----------


14 --------------+++++++++++++++++++++++++++X++++++++++++++++++++++++++++------------


15 -----------------+++++++++++++++++++++++++++X++++++++++++++++++++++++++++---------


Shmoo RD DQ P


   0000000000111111111122222222223333333333444444444455555555556666666666777777777788


   0123456789012345678901234567890123456789012345678901234567890123456789012345678901


00 -++++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++------------


01 ---+++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++------------


02 ----+++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++-----------


03 ----++++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++---------


04 +++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++--------------


05 +++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++--------------


06 ---++++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++----------


07 ---+++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++------------


08 ++++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++++------------


09 ----+++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++----------


10 +++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++--------------


11 ----+++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++----------


12 ---+++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++------------


13 ------++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++----------


14 ---+++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++------------


15 ------+++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++---------


Shmoo RD DQ N


   0000000000111111111122222222223333333333444444444455555555556666666666777777777788


   0123456789012345678901234567890123456789012345678901234567890123456789012345678901


00 -----------+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++------------


01 ---------------+++++++++++++++++++++++++++X++++++++++++++++++++++++++++-----------


02 --------------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++----------


03 --------------+++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++--------


04 -----------++++++++++++++++++++++++++++X++++++++++++++++++++++++++++--------------


05 ----------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++--------------


06 --------------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++----------


07 ----------------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++--------


08 -------------+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++----------


09 -----------------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++-------


10 -----------++++++++++++++++++++++++++++X++++++++++++++++++++++++++++--------------


11 ----------------+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++-------


12 --------------+++++++++++++++++++++++++++X++++++++++++++++++++++++++++------------


13 -----------------++++++++++++++++++++++++++++X++++++++++++++++++++++++++++--------


14 --------------+++++++++++++++++++++++++++X++++++++++++++++++++++++++++------------


15 -----------------+++++++++++++++++++++++++++X++++++++++++++++++++++++++++---------


Shmoo WR DQ


   0000000000111111111122222222223333333333444444444455555555556666666666777777777788


   0123456789012345678901234567890123456789012345678901234567890123456789012345678901


00 ----+++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++--------------


01 -------++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++--------------


02 ------++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++--------------


03 --------+++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++-----------


04 --+++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++----------------


05 -++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++----------------


06 -------+++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++-----------


07 --------++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++---------


08 -+++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++-----------------


09 ------++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++-----------


10 -+++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++------------------


11 -----+++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++----------


12 ---++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++--------------


13 -------+++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++------------


14 ---++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++--------------


15 ----+++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++-----------


Shmoo WR DM


WR DM


   0000000000111111111122222222223333333333444444444455555555556666666666777777777788


   0123456789012345678901234567890123456789012345678901234567890123456789012345678901


00 -------+++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++--------


01 ------+++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++--------


memsys_init call shmoo returns 0x00000000

PASS
FPS0
BT94
0009
BT95
0500
NAN3
RFS2
NAN5


CFE version 1.0.38-116.140 for BCM963138 (32bit,SP,LE)
Build Date: 2015年 09月 21日 星期一 12:51:42 CST ([email protected])
Copyright (C) 2000-2013 Broadcom Corporation.

Chip ID: BCM63139B0, ARM Cortex A9 Dual Core: 1000MHz
Total Memory: 268435456 bytes (256MB)
Status wait timeout: nandsts=0x70000000 mask=0x40000000, count=0
NAND ECC BCH-4, page size 0x800 bytes, spare size used 64 bytes
NAND flash device: Micron MT29F1G08AAC, id 0x2cf1 block 128KB size 131072KB
pmc_init:PMC using PMB_DIRECT mode
nvram break to cfe flag is 1
pTag is valid, tag 1 info: 
A06014, 33.162L.12, 63138
Board IP address                  : 192.168.1.1:ffffff00  
Host IP address                   : 192.168.1.100  
Gateway IP address                :   
Run from flash/host/tftp (f/h/c)  : f  
Default host run file name        : vmlinux  
Default host flash file name      : bcm963xx_fs_kernel  
Boot delay (0-9 seconds)          : 1  
Boot image (0=latest, 1=previous) : 0  
Default host ramdisk file name    :   
Default ramdisk store address     :   
Board Id (0-17)                   : R3000  
Number of MAC Addresses (1-32)    : 16  
Base MAC Address                  : 4c:8b:30:b8:a8:a0  
PSI Size (1-64) KBytes            : 64  
Enable Backup PSI [0|1]           : 1  
System Log Size (0-256) KBytes    : 256  
Board Serial Number               : CRXA5400102787  
Factory FW Version                : 33.162L.08  
Console Access Permission [0|1]   : 0  
MC memory allocation (MB)         : 4  
TM memory allocation (MB)         : 20  
WLan Feature                      : 0x00  

This is one CFE built for BELLALIANT R3000H
WANTYPE = 0 
pmc_switch_power_up: Rgmii Tx clock zone1 enable 0 zone2 enable 0. 

 LINK DOWN IMP Port 
Creating CPU ring for queue number 0 with 32 packets descriptor=0x00f5c5fc
 Done initializing Ring 0 Base=0x42a1ba40K End=0x42a1bc40K calculated entries= 32 RDD Base=0x02a1ba40K descriptor=0x00f5c5fc
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 110
Booting from latest image (address 0x03d80000, flash offset 0x03d80000) ...
Decompression OK!
Entry at 0x00008000
Closing network.
Starting program at 0x00008000
Booting Linux on physical CPU 0

Linux version 3.4.11-rt19 ([email protected]) (gcc version 4.6.2 (Buildroot 2011.11) ) #1 SMP PREEMPT Mon Sep 21 12:55:17 CST 2015

CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d

CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

Machine: BCM963138

bootconsole [earlycon0] enabled

Memory policy: ECC disabled, Data cache writealloc

creatiing a MT_MEMORY_NONCACHED device at physical address of 0x0fe00000 to virtual address at 0xcfe00000 with size of 0x200000 byte for DSL

creatiing a MT_MEMORY_NONCACHED device at physical address of 0x0ea00000 to virtual address at 0xcea00000 with size of 0x1400000 byte for RDPA tm

creatiing a MT_MEMORY_NONCACHED device at physical address of 0x0e600000 to virtual address at 0xce600000 with size of 0x400000 byte for RDPA mc

On node 0 totalpages: 58880

free_area_init_node: node 0, pgdat c048ade0, node_mem_map c1000000

  DMA zone: 32 pages used for memmap

  DMA zone: 0 pages reserved

  DMA zone: 4064 pages, LIFO batch:0

  Normal zone: 480 pages used for memmap

  Normal zone: 54304 pages, LIFO batch:15

pmc_init:PMC using PMB_DIRECT mode

L310 cache controller enabled

l2x0: 16 ways, CACHE_ID 0x410000c9, AUX_CTRL 0x6a450000, Cache size: 524288 B

PERCPU: Embedded 7 pages/cpu @c1204000 s5408 r8192 d15072 u32768

pcpu-alloc: s5408 r8192 d15072 u32768 alloc=8*4096

pcpu-alloc: [0] 0 [0] 1 

Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 58368

Kernel command line: console=ttyS0,115200 console=clog0,crashlog earlyprintk debug

PID hash table entries: 1024 (order: 0, 4096 bytes)

Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

Memory: 230MB = 230MB total

Memory: 228324k/228324k available, 33820k reserved, 0K highmem

Virtual kernel memory layout:

    vector  : 0xffff0000 - 0xffff1000   (   4 kB)

    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

    vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)

    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)

    modules : 0xbf000000 - 0xc0000000   (  16 MB)

      .text : 0xc0008000 - 0xc04326ec   (4266 kB)

      .init : 0xc0433000 - 0xc0456520   ( 142 kB)

      .data : 0xc0458000 - 0xc048b940   ( 207 kB)

       .bss : 0xc048b964 - 0xc04bd2e8   ( 199 kB)

Preemptible hierarchical RCU implementation.

	Dump stacks of tasks blocking RCU-preempt GP.

NR_IRQS:256

Cortex A9 MPCORE GIC init

DIST at fc01f000, CPU_IF at fc01e100

sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms

Booting Linux on physical CPU 0

Linux version 3.4.11-rt19 ([email protected]) (gcc version 4.6.2 (Buildroot 2011.11) ) #1 SMP PREEMPT Mon Sep 21 12:55:17 CST 2015

CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d

CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

Machine: BCM963138

bootconsole [earlycon0] enabled

Memory policy: ECC disabled, Data cache writealloc

creatiing a MT_MEMORY_NONCACHED device at physical address of 0x0fe00000 to virtual address at 0xcfe00000 with size of 0x200000 byte for DSL

creatiing a MT_MEMORY_NONCACHED device at physical address of 0x0ea00000 to virtual address at 0xcea00000 with size of 0x1400000 byte for RDPA tm

creatiing a MT_MEMORY_NONCACHED device at physical address of 0x0e600000 to virtual address at 0xce600000 with size of 0x400000 byte for RDPA mc

On node 0 totalpages: 58880

free_area_init_node: node 0, pgdat c048ade0, node_mem_map c1000000

  DMA zone: 32 pages used for memmap

  DMA zone: 0 pages reserved

  DMA zone: 4064 pages, LIFO batch:0

  Normal zone: 480 pages used for memmap

  Normal zone: 54304 pages, LIFO batch:15

pmc_init:PMC using PMB_DIRECT mode

L310 cache controller enabled

l2x0: 16 ways, CACHE_ID 0x410000c9, AUX_CTRL 0x6a450000, Cache size: 524288 B

PERCPU: Embedded 7 pages/cpu @c1204000 s5408 r8192 d15072 u32768

pcpu-alloc: s5408 r8192 d15072 u32768 alloc=8*4096

pcpu-alloc: [0] 0 [0] 1 

Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 58368

Kernel command line: console=ttyS0,115200 console=clog0,crashlog earlyprintk debug

PID hash table entries: 1024 (order: 0, 4096 bytes)

Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

Memory: 230MB = 230MB total

Memory: 228324k/228324k available, 33820k reserved, 0K highmem

Virtual kernel memory layout:

    vector  : 0xffff0000 - 0xffff1000   (   4 kB)

    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

    vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)

    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)

    modules : 0xbf000000 - 0xc0000000   (  16 MB)

      .text : 0xc0008000 - 0xc04326ec   (4266 kB)

      .init : 0xc0433000 - 0xc0456520   ( 142 kB)

      .data : 0xc0458000 - 0xc048b940   ( 207 kB)

       .bss : 0xc048b964 - 0xc04bd2e8   ( 199 kB)

Preemptible hierarchical RCU implementation.

	Dump stacks of tasks blocking RCU-preempt GP.

NR_IRQS:256

Cortex A9 MPCORE GIC init

DIST at fc01f000, CPU_IF at fc01e100

sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms

console [ttyS0] enabled

console [ttyS0] enabled

Calibrating delay loop... Calibrating delay loop... 1993.93 BogoMIPS (lpj=9969664)

1993.93 BogoMIPS (lpj=9969664)

pid_max: default: 32768 minimum: 301

pid_max: default: 32768 minimum: 301

Mount-cache hash table entries: 512

Mount-cache hash table entries: 512

--Kernel Config--

--Kernel Config--

  SMP=1

  SMP=1

  PREEMPT=1

  PREEMPT=1

  DEBUG_SPINLOCK=0

  DEBUG_SPINLOCK=0

  DEBUG_MUTEXES=0

  DEBUG_MUTEXES=0

CPU: Testing write buffer coherency: CPU: Testing write buffer coherency: ok

ok

Broadcom Logger v0.1 Sep 21 2015 12:52:17

Broadcom Logger v0.1 Sep 21 2015 12:52:17

Setting up static identity map for 0x32cd98 - 0x32cdcc

Setting up static identity map for 0x32cd98 - 0x32cdcc

CPU1: Booted secondary processor

CPU1: Booted secondary processor

CPU1: Unknown IPI message 0x1

CPU1: Unknown IPI message 0x1

Brought up 2 CPUs

Brought up 2 CPUs

SMP: Total of 2 processors activated (3987.86 BogoMIPS).

SMP: Total of 2 processors activated (3987.86 BogoMIPS).

NET: Registered protocol family 16

NET: Registered protocol family 16

bcm63xx_pcie: applying serdes parameters

bcm63xx_pcie: applying serdes parameters

PCIE port 0 link-up

PCIE port 0 link-up

PCI host bridge to bus 0000:00

PCI host bridge to bus 0000:00

pci_bus 0000:00: root bus resource [mem 0x90000000-0x9fffffff]

pci_bus 0000:00: root bus resource [mem 0x90000000-0x9fffffff]

pci 0000:00:00.0: [14e4:6313] type 01 class 0x060400

pci 0000:00:00.0: [14e4:6313] type 01 class 0x060400

pci 0000:00:00.0: PME# supported from D0 D3hot

pci 0000:00:00.0: PME# supported from D0 D3hot

PCI: bus0: Fast back to back transfers disabled

PCI: bus0: Fast back to back transfers disabled

pci 0000:01:00.0: [1bb5:0008] type 00 class 0x028000

pci 0000:01:00.0: [1bb5:0008] type 00 class 0x028000

pci 0000:01:00.0: reg 10: [mem 0x00000000-0x0000ffff pref]

pci 0000:01:00.0: reg 10: [mem 0x00000000-0x0000ffff pref]

pci 0000:01:00.0: reg 18: [mem 0x00000000-0x0000ffff pref]

pci 0000:01:00.0: reg 18: [mem 0x00000000-0x0000ffff pref]

pci 0000:01:00.0: reg 1c: [mem 0x00000000-0x0000ffff pref]

pci 0000:01:00.0: reg 1c: [mem 0x00000000-0x0000ffff pref]

pci 0000:01:00.0: supports D1

pci 0000:01:00.0: supports D1

pci 0000:01:00.0: PME# supported from D0 D1 D3hot

pci 0000:01:00.0: PME# supported from D0 D1 D3hot

PCI: bus1: Fast back to back transfers disabled

PCI: bus1: Fast back to back transfers disabled

pci 0000:00:00.0: BAR 9: assigned [mem 0x90000000-0x900fffff pref]

pci 0000:00:00.0: BAR 9: assigned [mem 0x90000000-0x900fffff pref]

pci 0000:01:00.0: BAR 0: assigned [mem 0x90000000-0x9000ffff pref]

pci 0000:01:00.0: BAR 0: assigned [mem 0x90000000-0x9000ffff pref]

pci 0000:01:00.0: BAR 2: assigned [mem 0x90010000-0x9001ffff pref]

pci 0000:01:00.0: BAR 2: assigned [mem 0x90010000-0x9001ffff pref]

pci 0000:01:00.0: BAR 3: assigned [mem 0x90020000-0x9002ffff pref]

pci 0000:01:00.0: BAR 3: assigned [mem 0x90020000-0x9002ffff pref]

pci 0000:00:00.0: PCI bridge to [bus 01-01]

pci 0000:00:00.0: PCI bridge to [bus 01-01]

pci 0000:00:00.0:   bridge window [mem 0x90000000-0x900fffff pref]

pci 0000:00:00.0:   bridge window [mem 0x90000000-0x900fffff pref]

PCI: enabling device 0000:00:00.0 (0140 -> 0143)

PCI: enabling device 0000:00:00.0 (0140 -> 0143)

bcm63xx_pcie: applying serdes parameters

bcm63xx_pcie: applying serdes parameters

PCIE port 1 link-up

PCIE port 1 link-up

PCI host bridge to bus 0001:00

PCI host bridge to bus 0001:00

pci_bus 0001:00: root bus resource [mem 0xa0000000-0xafffffff]

pci_bus 0001:00: root bus resource [mem 0xa0000000-0xafffffff]

pci 0001:00:00.0: [14e4:6313] type 01 class 0x060400

pci 0001:00:00.0: [14e4:6313] type 01 class 0x060400

pci 0001:00:00.0: PME# supported from D0 D3hot

pci 0001:00:00.0: PME# supported from D0 D3hot

PCI: bus0: Fast back to back transfers disabled

PCI: bus0: Fast back to back transfers disabled

pci 0001:01:00.0: [14e4:43bb] type 00 class 0x028000

pci 0001:01:00.0: [14e4:43bb] type 00 class 0x028000

pci 0001:01:00.0: reg 10: [mem 0x00000000-0x00007fff 64bit]

pci 0001:01:00.0: reg 10: [mem 0x00000000-0x00007fff 64bit]

pci 0001:01:00.0: reg 18: [mem 0x00000000-0x003fffff 64bit]

pci 0001:01:00.0: reg 18: [mem 0x00000000-0x003fffff 64bit]

pci 0001:01:00.0: supports D1 D2

pci 0001:01:00.0: supports D1 D2

pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold

pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold

PCI: bus1: Fast back to back transfers disabled

PCI: bus1: Fast back to back transfers disabled

pci 0001:00:00.0: BAR 8: assigned [mem 0xa0000000-0xa05fffff]

pci 0001:00:00.0: BAR 8: assigned [mem 0xa0000000-0xa05fffff]

pci 0001:01:00.0: BAR 2: assigned [mem 0xa0000000-0xa03fffff 64bit]

pci 0001:01:00.0: BAR 2: assigned [mem 0xa0000000-0xa03fffff 64bit]

pci 0001:01:00.0: BAR 0: assigned [mem 0xa0400000-0xa0407fff 64bit]

pci 0001:01:00.0: BAR 0: assigned [mem 0xa0400000-0xa0407fff 64bit]

pci 0001:00:00.0: PCI bridge to [bus 01-01]

pci 0001:00:00.0: PCI bridge to [bus 01-01]

pci 0001:00:00.0:   bridge window [mem 0xa0000000-0xa05fffff]

pci 0001:00:00.0:   bridge window [mem 0xa0000000-0xa05fffff]

PCI: enabling device 0001:00:00.0 (0140 -> 0143)

PCI: enabling device 0001:00:00.0 (0140 -> 0143)

bio: create slab <bio-0> at 0

bio: create slab <bio-0> at 0

console [clog0] enabled, bootconsole disabled

console [clog0] enabled, bootconsole disabled

SCSI subsystem initialized

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

bcmhs_spi bcmhs_spi.1: master is unqueued, this is deprecated

skbFreeTask created successfully

[0;34mBLOG v3.0 Initialized[0m

BLOG Rule v1.0 Initialized

Broadcom IQoS v0.1 Sep 21 2015 12:55:00 initialized

Broadcom GBPM v0.1 Sep 21 2015 12:55:00 initialized

Switching to clocksource timer_cs

NET: Registered protocol family 2

IP route cache hash table entries: 2048 (order: 1, 8192 bytes)

TCP established hash table entries: 8192 (order: 4, 65536 bytes)

TCP bind hash table entries: 8192 (order: 4, 98304 bytes)

TCP: Hash tables configured (established 8192 bind 8192)

TCP: reno registered

UDP hash table entries: 128 (order: 0, 4096 bytes)

UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)

NET: Registered protocol family 1

squashfs: version 4.0 (2009/01/31) Phillip Lougher

jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.

fuse init (API version 7.18)

msgmni has been set to 445

io scheduler noop registered (default)

brd: module loaded

loop: module loaded

Broadcom NAND controller (BrcmNand Controller)

mtd->oobsize=0, mtd->eccOobSize=0

NAND_CS_NAND_XOR=00000000

B4: NandSelect=40000001, nandConfig=25152300, chipSelect=0

brcmnand_read_id: CS0: dev_id=2cf18095

After: NandSelect=00000001, nandConfig=25152300

Block size=00020000, erase shift=17

NAND Config: Reg=25152300, chipSize=128 MB, blockSize=128K, erase_shift=11

busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff

timing1 not adjusted: 65644458

timing2 not adjusted: 80000e56

BrcmNAND mfg 2c f1 MICRON MT29F1G08ABA 128MB on CS0


Found NAND on CS0: ACC=c3040010, cfg=25152300, flashId=2cf18095, tim1=65644458, tim2=80000e56

BrcmNAND version = 0x80000700 128MB @00000000

brcmnand_scan: B4 nand_select = 00000001

brcmnand_scan: After nand_select = 00000001

handle_acc_control: default CORR ERR threshold  3 bits

ACC: 16 OOB bytes per 512B ECC step; from ID probe: 16

page_shift=11, bbt_erase_shift=17, chip_shift=27, phys_erase_shift=17

Brcm NAND controller version = 7.0 NAND flash size 128MB @18000000

ECC layout=brcmnand_oob_bch4_2k

brcmnand_scan:  mtd->oobsize=64

brcmnand_scan: oobavail=35, eccsize=512, writesize=2048

brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=4, eccbytes=7

-->brcmnand_default_bbt

brcmnand_default_bbt: bbt_td = bbt_slc_bch4_main_descr

Bad block table Bbt0 found at page 0000ffc0, version 0x01 for chip on CS0

Bad block table 1tbB found at page 0000ff80, version 0x01 for chip on CS0

brcmnand_reset_corr_threshold: default CORR ERR threshold  3 bits for CS0

***** Found UBIFS Marker at 0x0421ff00

***** Found UBIFS Marker at 0x004bff00

Creating 10 MTD partitions on "brcmnand.0":

0x000004220000-0x000007ae0000 : "rootfs"

0x0000004c0000-0x000003d80000 : "rootfs_update"

0x000007b00000-0x000007f00000 : "data"

0x000000000000-0x000000020000 : "nvram"

0x000003e80000-0x000007ae0000 : "image"

0x000000120000-0x000003d80000 : "image_update"

0x000003d80000-0x000003e80000 : "tag"

0x000000020000-0x000000120000 : "tag_update"

0x000003e80000-0x000004220000 : "bootfs"

0x000000120000-0x0000004c0000 : "bootfs_update"

UBI: attaching mtd0 to ubi0

UBI: physical eraseblock size:   131072 bytes (128 KiB)

UBI: logical eraseblock size:    126976 bytes

UBI: smallest flash I/O unit:    2048

UBI: VID header offset:          2048 (aligned 2048)

UBI: data offset:                4096

UBI: max. sequence number:       2

UBI: attached mtd0 to ubi0

UBI: MTD device name:            "rootfs"

UBI: MTD device size:            56 MiB

UBI: number of good PEBs:        454

UBI: number of bad PEBs:         0

UBI: number of corrupted PEBs:   0

UBI: max. allowed volumes:       128

UBI: wear-leveling threshold:    4096

UBI: number of internal volumes: 1

UBI: number of user volumes:     1

UBI: available PEBs:             0

UBI: total number of reserved PEBs: 454

UBI: number of PEBs reserved for bad PEB handling: 4

UBI: max/mean erase counter: 1/0

UBI: image sequence number:  0

UBI: background thread "ubi_bgt0d" started, PID 258

tun: Universal TUN/TAP device driver, 1.6

tun: (C) 1999-2004 Max Krasnyansky <[email protected]>

PPP generic driver version 2.4.2

PPP BSD Compression module registered

PPP Deflate Compression module registered

NET: Registered protocol family 24

i2c /dev entries driver

brcmboard: brcm_board_init entry

SES: Button Interrupt 0x2 is enabled

SES: LED GPIO 0x8018 is enabled

DYING GASP IRQ initialized 

Serial: BCM63XX driver $Revision: 3.00 $

ttyS0 at MMIO 0xfffe8600 (irq = 64) is a BCM63XX

ttyS1 at MMIO 0xfffe8620 (irq = 65) is a BCM63XX

BPM: tot_mem_size=268435456B (256MB), buf_mem_size <15%> =40265310B (38MB), num of buffers=19972, buf size=2016

Broadcom BPM Module Char Driver v0.1 Sep 21 2015 12:52:35 Registered<244>[0m

GACT probability NOT on

Mirror/redirect action on

u32 classifier

    input device check on

    Actions configured

TCP: cubic registered

Initializing XFRM netlink socket

NET: Registered protocol family 10

IPv6 over IPv4 tunneling driver

NET: Registered protocol family 17

NET: Registered protocol family 15

Initializing MCPD Module

Ebtables v2.0 registered

ebt_time registered

ebt_ftos registered

ebt_wmm_mark registered

8021q: 802.1Q VLAN Support v1.8

UBIFS: mounted UBI device 0, volume 0, name "rootfs_ubifs"

UBIFS: mounted read-only

UBIFS: file system size:   55234560 bytes (53940 KiB, 52 MiB, 435 LEBs)

UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)

UBIFS: media format:       w4/r0 (latest is w4/r0)

UBIFS: default compressor: zlib

UBIFS: reserved for root:  0 bytes (0 KiB)

VFS: Mounted root (ubifs filesystem) readonly on device 0:10.

Freeing init memory: 140K


init started: BusyBox v1.17.2 (2015-07-13 17:48:34 CST)

starting pid 296, tty '': '/bin/sh -l -c "bcm_boot_launcher start"'
Mounting filesystems...
jffs2: Empty flash at 0x000b61f0 ends at 0x000b6800

jffs2: Empty flash at 0x000d7118 ends at 0x000d7800

Configuring system...
jffs2: notice: (302) check_node_data: wrong data CRC in data node at 0x003591e4: read 0xda14db60, calculated 0xd6371b94.

Loading drivers and kernel modules... 

rdpa: module license 'Proprietary' taints kernel.

Disabling lock debugging due to kernel taint

kerSysScratchPadGet wan type - GBE 

kerSysScratchPadGet wan emac - EMAC0 

ddr_tm_base_address 0xcea00000, size 20971520/20971520, ddr_tm_base_address_phys 0x0ea00000

ddr_multicast_base_address 0xce600000, size 4194304/4194304, ddr_multicast_base_address_phys 0x0e600000

WANTYPE = 1 

++++Runner gso_desc_pool created successfully

pmc_switch_power_up: Rgmii Tx clock zone1 enable 0 zone2 enable 0. 

cat: can't open '/dev/rgs_logger': No such device or address
brcmchipinfo: brcm_chipinfo_init entry

NBUFF v1.0 Initialized

[0;36;44mInitialized fcache state[0m

[0;36;44mBroadcom Packet Flow Cache  Char Driver v2.2 Sep 21 2015 12:52:36 Registered<242>[0m

Created Proc FS /procfs/fcache

[0;36;44mBroadcom Packet Flow Cache registered with netdev chain[0m

[0;36;44mBroadcom Packet Flow Cache learning via BLOG enabled.[0m

[0;35m[FHW]  pktDbgLvl[0xbf145ae4]=0[0m

[0;34m[FHW]  fhw_construct: [0m

[0;36;44mInitialized Fcache HW accelerator layer state[0m

flwStatsThread created

[0;36;44mConstructed Broadcom Packet Flow Cache v2.2 Sep 21 2015 12:52:36[0m

Initialized Runner Unicast Layer

Initialized Runner Multicast Layer

[0;36;44mBroadcom Packet Flow Cache HW acceleration enabled.[0m

Enabled Runner binding to Flow Cache

Initialized Runner Protocol Layer (700)

Broadcom Runner Blog Driver Char Driver v0.1 Sep 21 2015 12:52:37 Registered <252>

Runner Port#0 (Internal MUX Port#2) connects to Crossbar Port#1

Switch Port#3 (Internal MUX Port#0) connects to Crossbar Port#4

Unused MUX Internal Port#1 connects to Crossbar External Port#0

Cross Bar MUX Config : Internal Port 00 maps to External Port 04 <reg_val : 0x0000000c>

Cross Bar MUX Config : Internal Port 01 maps to External Port 00 <reg_val : 0x00000004>

Cross Bar MUX Config : Internal Port 02 maps to External Port 01 <reg_val : 0x00000044>

Broadcom BCM63139B0 Ethernet Network Device v0.1 Sep 21 2015 12:54:43

dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered 

++++ disabling GSO on logical_port=0 dev=ewan0

ewan0: <Int sw port: 0> <Logical : 00> PHY_ID <0x0007f00c : 0x0c> MAC : 4C:8B:30:B8:A8:A0

eth0: <Ext sw port: 0> <Logical : 08> PHY_ID <0x0007f008 : 0x08> MAC : 4C:8B:30:B8:A8:A0

eth1: <Ext sw port: 1> <Logical : 09> PHY_ID <0x0007f009 : 0x09> MAC : 4C:8B:30:B8:A8:A0

eth2: <Ext sw port: 2> <Logical : 10> PHY_ID <0x0007f00a : 0x0a> MAC : 4C:8B:30:B8:A8:A0

eth3: <Ext sw port: 3> <Logical : 11> PHY_ID <0x0007f00b : 0x0b> MAC : 4C:8B:30:B8:A8:A0

Ethernet Auto Power Down and Sleep: Enabled

Cross bar port 1 of Int switch port 0; Adv capability change : MII=0x01e1, GMII=0x0f00

Ext switch port 0; Adv capability change : MII=0x01e1, GMII=0x0f00

Ext switch port 1; Adv capability change : MII=0x01e1, GMII=0x0f00

Ext switch port 2; Adv capability change : MII=0x01e1, GMII=0x0f00

Cross bar port 4 of Ext switch port 3; Adv capability change : MII=0x01e1, GMII=0x0f00

Creating CPU ring for queue number 4 with 512 packets descriptor=0xbf0eda88

 Done initializing Ring 4 Base=0xffdf0000 End=0xffdf2000 calculated entries= 512 RDD Base=0x00c0c000 descriptor=0xbf0eda88

Creating CPU ring for queue number 3 with 512 packets descriptor=0xbf0eda5c

 Done initializing Ring 3 Base=0xffdec000 End=0xffdee000 calculated entries= 512 RDD Base=0x00c10000 descriptor=0xbf0eda5c

NComm TMS V6.80 Kernel Module loaded.

libata version 3.00 loaded.

++++ Powering up SATA block

writing PORT0_SATA3_PCB_BLOCK_ADDR

INFO: PLL lock for port0 detected 9100...

ahci: SSS flag set, parallel bus scan disabled

ahci strict-ahci.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode

ahci strict-ahci.0: flags: 64bit ncq sntf stag clo pmp slum part 

scsi0 : ahci_platform

ata1: SATA max UDMA/133 mmio [mem 0x8000a000-0x8000bfff] port 0x100 irq 77

ata1: SATA link down (SStatus 0 SControl 300)

ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

++++ Powering up USB blocks

xhci-hcd xhci-hcd.0: xHCI Host Controller

xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1

xhci-hcd xhci-hcd.0: irq 106, io mem 0x8000d000

xHCI xhci_add_endpoint called for root hub

xHCI xhci_check_bandwidth called for root hub

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 0 ports detected

xhci-hcd xhci-hcd.0: xHCI Host Controller

xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2

xHCI xhci_add_endpoint called for root hub

xHCI xhci_check_bandwidth called for root hub

hub 2-0:1.0: USB hub found

hub 2-0:1.0: 2 ports detected

ehci-platform ehci-platform.0: Generic Platform EHCI Controller

ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 3

ehci-platform ehci-platform.0: irq 105, io mem 0x8000c300

ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00

hub 3-0:1.0: USB hub found

hub 3-0:1.0: 2 ports detected

ohci-platform ohci-platform.0: Generic Platform OHCI Controller

ohci-platform ohci-platform.0: new USB bus registered, assigned bus number 4

ohci-platform ohci-platform.0: irq 104, io mem 0x8000c400

hub 4-0:1.0: USB hub found

hub 4-0:1.0: 2 ports detected

usbcore: registered new interface driver usblp

Initializing USB Mass Storage driver...

usbcore: registered new interface driver usb-storage

USB Mass Storage support registered.

[1m[34mWifi Forwarding Driver is initialized![0m

Initializing WLCSM Module

WLCSM Module loaded successfully 

dhd_module_init in

dhd_queue_budget = 256

dhd_sta_threshold = 1024

no wifi platform data, skip

PCI_PROBE:  bus 1, slot 0,vendor 14E4, device 43BB(good PCI location)

PCI: enabling device 0001:01:00.0 (0140 -> 0142)

DHD: dongle ram size is set to 983040(orig 983040) at 0x180000

dhd_attach: wl0: pre-allocated buffer mode is enabled (allocskbsz=2048)

dhd_attach: wl0: watermark total is 12981

dhd_attach(): thread:dhd_watchdog_thread:21e started

dhd_attach(): thread:dhd_dpc:21f started

dhd_deferred_work_init: work queue initialized 

Creating CPU ring for queue number 8 with 1024 packets descriptor=0xbf0edb38

 Done initializing Ring 8 Base=0xffde0000 End=0xffde4000 calculated entries= 1024 RDD Base=0x00c18000 descriptor=0xbf0edb38

Interrupt coalescing enabled for ring 8. ic_timeout 500 ic_maxpktcnt 32

[1m[34m wfd_bind: Dev wl%d wfd_idx 0 Type fkb configured WFD CPU RxQId (8), status (0) number_of_queues 1 qmask 0x1[0m

Dongle Host Driver, version 7.14.43.21.cpe33.162L16.0-kdb

Compiled in drivers/net/wireless/bcmdhd on Sep 21 2015 at 12:54:22

dhdpcie_download_code_file: download firmware /etc/wlan/dhd/43602a1/rtecdc.bin

wl: reading /etc/wlan/bcmcmn_nvramvars.bin, file size=20

wl: reading /etc/wlan/bcm43602_nvramvars.bin, file size=20

dhdpcie_bus_write_vars: Download, Upload and compare of NVRAM succeeded.

PCIe shared addr read took 216383 usec before dongle is ready

DMA RX offset from shared Area 0

bus->txmode_push is set to 0

ring_info_raw: 56 

f8 a0 26 00 88 a9 26 00 a0 ab 26 00 b8 ad 26 00 

c4 ad 26 00 00 00 00 00 00 00 00 00 00 00 00 00 

00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 

00 00 00 00 86 00 00 00 

max H2D queues 134

dhd_bus_start: Initializing 134 flowrings

dhd_bus_cmn_writeshared:

  0000: 00 00 2c 09 00 00 00 00 

dhd_bus_cmn_writeshared:

  0000: 00 e0 2b 09 00 00 00 00 

dhd_bus_cmn_writeshared:

  0000: 00 68 21 09 00 00 00 00 

dhd_bus_cmn_writeshared:

  0000: 00 80 2c 09 00 00 00 00 

dhd_bus_cmn_writeshared:

  0000: 00 e0 1e 09 00 00 00 00 

dhd_bus_cmn_writeshared:

  0000: 00 00 2d 09 00 00 00 00 

dhd_bus_cmn_writeshared:

  0000: c0 e7 25 09 

dhd_bus_cmn_writeshared:

  0000: 08 00 00 00 

mac: 6 

4c 8b 30 b8 a8 a1 

CONSOLE: hndarm_armr addr: 0x18002000, cr4_idx: 0

CONSOLE: 000000.001 

CONSOLE: RTE (PCIE-MSG_BUF) 7.10.274.18 (r501173) on BCM43602 r1 @ 40.0/160.0/160.0MHz

CONSOLE: 000000.019 allocating a max of 255 rxcplid buffers

CONSOLE: 000000.020 pciemsgbuf0: Broadcom PCIE MSGBUF driver

CONSOLE: 000000.040 reclaim section 0: Returned 47642 bytes to the heap

CONSOLE: 000000.193 wl0: Broadcom BCM43602 802.11 Wireless Controller 7.10.274.18 (r501173)

CONSOLE: 000000.194 TCAM: 256 used: 124 exceed:0

CONSOLE: 000000.194 reclaim section 1: Returned 123292 bytes to the heap

CONSOLE: 

--SMP support

wl: dsl_tx_pkt_flush_len=338

wl: norm_wmark_tot=12981, pktc_wmark_tot=12981

Broadcom 802.1Q VLAN Interface, v0.1

RDPA Speed Service Command Driver

RDPA DS WAN UDP Filter Command Driver

watchdog init_module() called

parent cap:512, dev cap:256

Setting MPS to 128

PCI: enabling device 0000:01:00.0 (0144 -> 0146)

PCIe MSI Interrupt enabling failed. Fall back to Legacy IRQ

PCIe Legacy Interrupt Enabled

qdpc_map_sysctl_regs() Mapping sysctl

BAR:0 vaddr=0xd0c40000 busaddr=90000000 offset=0 len=65536

qdpc_map_epmem() Mapping epmem

BAR:2 vaddr=0xd0c60000 busaddr=90010000 offset=0 len=65536

qdpc_map_dma_regs() Mapping dma registers

BAR:3 vaddr=0xd0c80000 busaddr=90020000 offset=0 len=65536

qdpc-host version v36.7.0.41 Quantenna Communications Inc.

Tx Descriptor table: uncache virtual addr: 0xffdde000 paddr: 0x08732000

Rx Descriptor table: uncache virtual addr: 0xffdde5a0 paddr: 0x087325a0

EP_handled_idx: uncache virtual addr: 0xffddf1a0 paddr: 0x087331a0

host0: Vmac Ethernet found

Start to monitor qtn reload. ..... 

Waiting for EP bootup... 

Starting SWMDK...
PCI memory is little endian

EP map start addr : 0x00000000, Host memory start : 0x00000000

Setting HOST ready...

Note: Loading 6300 MDK (default) driver for 0 chip 
Switch MDK: num_switches = 1
Switch MDK: unit = 1; phy_pbmp = 0xf; config_pbmp = 0xf Ethernet Auto Power Down and Sleep: Enabled

Requested DMA mask:0xbfffffff

EP FW load request...

Start download Firmware u-boot.bin...

nophy_pbmp = Energy Efficient Ethernet: Enabled

0x0
Switch MDK link poll thread: unit=1; phypbmp=0xf config_pbmp=0xf
eth3 (Ext switch port: 3) (Logical Port: 11) Link UP 100 mbps full duplex

Saving kernel bootup messages for dumpsysinfo...
Starting CMS smd...
FW Data[0]: VA:0xd0c25000 PA:0x00d00000 Sz=68980..

done!

Image. Sz:68980 State:0xc

Image downloaded....!

Start booting EP...


=====BELLALIANT R3000H  Release Version 33.162L.16 (build timestamp 150921_1256) =====

rm: can't remove '/var/dbus/messagebus.pid': No such file or directory
Initializing CMS MDM in Hybrid98+181 mode
old image is sdk10 image
Sorry, rule does not exist.
Sorry, rule does not exist.
Device "br0" does not exist.
ssk:error:16.329:rutSys_createHostsFile:981:fail to get link_local_address of Energy Efficient Ethernet changed to disabled

LAN Intf 'br0'
nvram data is not changed, needn't update nvram

ssk:error:16.355:AEI_SetTimeManual:576:manual set sntp time!!! new=2018-02-27T22:45:42+00:00
AEI_rut_getTimeZoneName index:6
ssk:error:16.362:rutSntp_restart:174:sntp start para=-d -s ntp.actiontec.com -s pool.ntp.org -s clock.isc.org -f 3600 -t Atlantic Time
sntp:error:16.388:main:991:[sntp.c:991]UpdateFrequency=3600
no exist file [/var/autoreservation] error num [2],reason [No such file or directory]
eth3 (Ext switch port: 3) (Logical Port: 11) Link DOWN.

PCI memory is little endian

DMA offset : 0x00000000, no need to reset the value.

Setting HOST ready...

Requested DMA mask:0xbfffffff

EP FW load request...

Start download Firmware topaz-linux.lzma.img...

Netfilter messages via NETLINK v0.30.

[MCPD] update igmp filter list.
br_netlink_mcpd.c: Setting registration type 0 pid to 759

ip_tables: (C) 2000-2006 Netfilter Core Team

iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
eth3 (Ext switch port: 3) (Logical Port: 11) Link UP 100 mbps full duplex

ADDRCONF(NETDEV_UP): eth0: link is not ready

netdev path : eth0.0 -> eth0

BCMVLAN : eth0 mode was set to RG

Created new Tag Rule: dev=eth0, dir=1, tags=0, id=0

Created new Tag Rule: dev=eth0, dir=1, tags=1, id=0

Created new Tag Rule: dev=eth0, dir=1, tags=2, id=0

Created device eth0.0 entered promiscuous mode

device eth0 entered promiscuous mode

new Tag Rule: dev=eth0, dir=0, tags=0, br0: port 1(eth0.0) entered forwarding state

br0: port 1(eth0.0) entered forwarding state

id=0

Created new Tag Rule: dev=eth0, dir=0, tags=1, id=0

Created new Tag Rule: dev=eth0, dir=0, tags=2, id=0

br0: port 1(eth0.0) entered disabled state

br0: port 1(eth0.0) entered forwarding state

br0: port 1(eth0.0) entered forwarding state

ADDRCONF(NETDEV_UP): eth1: link is not ready

netdev path : eth1.0 -> eth1

BCMVLAN : eth1 mode was set to RG

Created new Tag Rule: dev=eth1, dir=1, tags=0, id=0

Created new Tag Rule: dev=eth1, dir=1, tags=1, id=0

Created new Tag Rule: dev=eth1, dir=1, tags=2, id=device eth1.0 entered promiscuous mode

device eth1 entered promiscuous mode

br0: port 2(eth1.0) entered forwarding state

br0: port 2(eth1.0) entered forwarding state

0

Created new Tag Rule: dev=eth1, dir=0, tags=0, id=0

Created new Tag Rule: dev=eth1, dir=0, tags=1, id=0

Created new Tag Rule: dev=eth1, dir=0, tags=2, id=0

br0: port 2(eth1.0) entered disabled state

br0: port 1(eth0.0) entered disabled state

br0: port 2(eth1.0) entered forwarding state

br0: port 2(eth1.0) entered forwarding state

br0: port 1(eth0.0) entered forwarding state

br0: port 1(eth0.0) entered forwarding state

ADDRCONF(NETDEV_UP): eth2: link is not ready

netdev path : eth2.0 -> eth2

BCMVLAN : eth2 mode was set to RG

Created new Tag Rule: dev=eth2, dir=1, tags=0, id=0

Created new Tag Rule: dev=eth2, dir=1, tags=1, id=0

Created new Tag Rule: dev=eth2, dir=1device eth2.0 entered promiscuous mode

device eth2 entered promiscuous mode

br0: port 3(eth2.0) entered forwarding state

br0: port 3(eth2.0) entered forwarding state

, tags=2, id=0

Created new Tag Rule: dev=eth2, dir=0, tags=0, id=0

Created new Tag Rule: dev=eth2, dir=0, tags=1, id=0

Created new Tag Rule: dev=eth2, dir=0, tags=2, id=0

FW Data[0]: VA:0xd1892000 PA:0x00d00000 Sz=1048576..

br0: port 3(eth2.0) entered disabled state

br0: port 2(eth1.0) entered disabled state

br0: port 1(eth0.0) entered disabled state

done!

FW Data[1]: VA:0xd1992000 PA:0x00d00000 Sz=1048576..

br0: port 3(eth2.0) entered forwarding state

br0: port 3(eth2.0) entered forwarding state

br0: port 2(eth1.0) entered forwarding state

br0: port 2(eth1.0) entered forwarding state

br0: port 1(eth0.0) entered forwarding state

br0: port 1(eth0.0) entered forwarding state

done!

FW Data[2]: VA:0xd1a92000 PA:0x00d00000 Sz=1048576..

netdev path : eth3.0 -> eth3

BCMVLAN : eth3 mode was set to RG

Created new Tag Rule: dev=eth3, dir=1, tags=0, id=0

Created new Tag Rule: dev=eth3, dir=1, tags=1, id=0

Created newdevice eth3.0 entered promiscuous mode

device eth3 entered promiscuous mode

br0: port 4(eth3.0) entered forwarding state

br0: port 4(eth3.0) entered forwarding state

done!

 Tag Rule: dev=eth3, dir=1, tags=2, id=0

Created FW Data[3]: VA:0xd1b92000 PA:0x00d00000 Sz=1048576..

new Tag Rule: dev=eth3, dir=0, tags=0, id=0

Created new Tag Rule: dev=eth3, dir=0, tags=1, id=0

Created new Tag Rule: dev=eth3, dir=0, tags=2, id=0

done!

FW Data[4]: VA:0xd1c92000 PA:0x00d00000 Sz=75231..

done!

Image. Sz:4269535 State:0xc

Image downloaded....!

Start booting EP...

br0: port 4(eth3.0) entered disabled state

br0: port 3(eth2.0) entered disabled state

br0: port 2(eth1.0) entered disabled state

br0: port 1(eth0.0) entered disabled state

br0: port 4(eth3.0) entered forwarding state

br0: port 4(eth3.0) entered forwarding state

br0: port 3(eth2.0) entered forwarding state

br0: port 3(eth2.0) entered forwarding state

br0: port 2(eth1.0) entered forwarding state

br0: port 2(eth1.0) entered forwarding state

br0: port 1(eth0.0) entered forwarding state

br0: port 1(eth0.0) entered forwarding state

device wl0 entered promiscuous mode

br0: port 5(wl0) entered forwarding state

br0: port 5(wl0) entered forwarding state

device wl0 left promiscuous mode

br0: port 5(wl0) entered disabled state

device wl0 entered promiscuous mode

br0: port 5(wl0) entered forwarding state

br0: port 5(wl0) entered forwarding state

interface wl1 does not exist!
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: SIOCSIFADDR: No such device
interface wl1.3 does not exist!
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: SIOCSIFADDR: No such device
ssk:error:23.072:rcl_lanAlgObject:29:switch SIP ALG to state 1
insmod nf_conntrack_sip and nf_nat_sip
nf_conntrack version 0.5.0 (1024 buckets, 8192 max)

ADDRCONF(NETDEV_UP): ewan0: link is not ready

iptables: No chain/target/match by that name.
captiveEnable=0,webActiveLogEnable=0,webSiteBlockEnable=0
set NETLINK_RECV_NO_ENOBUFS
[MCPD] update igmp filter list.
__ACL_MCF__POLICY__ : black=0
ssk:error:24.632:ssk_init:1549:dbus-daemon is ready now.

monitor task is initialized pid= 641 

ssk:error:26.662:AEI_initQosAlgNetlinkFd:7268:could not open netlink socket for alg qos
ssk:error:26.701:initWanLinkInfo_igd:500:could not get DSL intf cfg, ret=9005
ssk:error:26.701:initWanLinkInfo_igd:500:could not get DSL intf cfg, ret=9005

starting pid 1529, tty '': '-/bin/sh -l -c consoled'
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
backup_psi_number_blk=1 result=65536

PMD: Module entry!
PMD: couldn't get any msg!
PMD: couldn't get any msg!
WLmngr Daemon is running
killall: wlevt: no process killed
wlevt is ready for new msg...
=====>ENTER
Default....
tr69c:error:27.881:getFullPathToIpvxAddrLocked_igd:383:Could not find 172.29.29.2 in data model
tr69c:error:27.882:updateTr69cCfgInfo_igd:832:could not build full path to 172.29.29.2
[STUND] Will exit, STUN is not enabled....
wlmngr:error:28.825:getAdapterListFromMdm:3910:instanceId=3 is not supported! (only 1 or 2)
wlmngr:error:28.826:getAdapterListFromMdm:3910:instanceId=4 is not supported! (only 1 or 2)
wlmngr:error:28.826:getAdapterListFromMdm:3910:instanceId=5 is not supported! (only 1 or 2)
wlmngr:error:28.826:getAdapterListFromMdm:3910:instanceId=6 is not supported! (only 1 or 2)
wlmngr:error:28.826:getAdapterListFromMdm:3910:instanceId=7 is not supported! (only 1 or 2)
wlmngr:error:28.826:getAdapterListFromMdm:3910:instanceId=8 is not supported! (only 1 or 2)
WPS Device PIN = 49927931
EP boot successful, starting config...

Connection established with Target BBIC4 board

Detect EP bootup complete 

wlctl: Unsupported
wlctl: Unsupported
< SES_LED_OFF >

killall: hspotap: no process killed
killall: bsd: no process killed
CONSOLE: 000018.659 wl0: wlc_enable_probe_req: state down, deferring setting of host flags

br0: port 5(wl0) entered disabled state

dhd_set_mcast_list_handler: interface info not available/down 

wlctl: Unsupported
CONSOLE: 000018.905 wl0: wlc_enable_probe_req: state down, deferring setting of host flags

CONSOLE: 000018.939 wl0: Radio pwrsave not supported in non-mbss case yet.

CONSOLE: 000018.946 wl0: Radio pwrsave not supported in non-mbss case yet.

CONSOLE: 000018.954 wl0: Radio pwrsave not supported in non-mbss case yet.

CONSOLE: 000018.962 wl0: Radio pwrsave not supported in non-mbss case yet.

CONSOLE: 000018.974 wl0: invalid chanspec 0x1000

CONSOLE: 000019.009 wl0: wlc_enable_probe_req: state down, deferring setting of host flags

CONSOLE: 000019.034 wl0: wlc_enable_probe_req: state down, deferring setting of host flags

Setting SSID: "FibreOP787"
Setting SSID: "FibreOP787-1"
Setting SSID: "FibreOP787-2"
Setting SSID: "FibreOP787-3"
wlctl: Unsupported
wlctl: Unsupported
wlctl: Unsupported
ifconfig: wl1: error fetching interface information: Device not found
ifconfig: wl1.1: error fetching interface information: Device not found
ifconfig: wl1.2: error fetching interface information: Device not found
ifconfig: wl1.3: error fetching interface information: Device not found
ifconfig: br1: error fetching interface information: Device not found
ifconfig: br2: error fetching interface information: Device not found
ifconfig: br3: error fetching interface information: Device not found
ifconfig: br4: error fetching interface information: Device not found
ifconfig: br5: error fetching interface information: Device not found
ifconfig: br6: error fetching interface information: Device not found
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: selected channel spec: 0x1001
acsd: Adjusted channel spec: 0x1001
acsd: selected DFS-exit channel spec: 0x1001
acsd: selected channel spec: 0x1001
acsd: Adjusted channel spec: 0x1001
acsd: selected channel spec: 0x1001
br0: port 5(wl0) entered forwarding state

br0: port 5(wl0) entered forwarding state

wlctl: Unsupported
wlctl: Unsupported
br0: port 5(wl0) entered disabled state

device wl0 left promiscuous mode

br0: port 5(wl0) entered disabled state

device wl0 entered promiscuous mode

br0: port 5(wl0) entered forwarding state

br0: port 5(wl0) entered forwarding state

Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
169.254.1.2: RPC: Port mapper failure - RPC: Unable to send
169.254.1.2: RPC: Port mapper failure - RPC: Unable to send
ERROR rtd.c:159 fail to recv msg from msg bus!
ERROR rtd.c:159 fail to recv msg from msg bus!
device host0 entered promiscuous mode

br0: port 6(host0) entered forwarding state

br0: port 6(host0) entered forwarding state

add ebtables rule for QTN
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
wlmngr:error:38.354:Aei_qcsapi_get_channel:125:aei_qcsapi_get current channel fail
wlmngr:error:38.452:Aei_QTN_Bssid_check_and_set:2329:QTN wifi0 bssid has been set done, target bssid is same with current bssid !
WARNING tr69_rut_route.c:98 Both PPPConn and IPConn are Disable!
WARNING tr69_rut_route.c:98 Both PPPConn and IPConn are Disable!
ERROR tr69_func_aei_firewall_rules.c:69 gwifname is null
ip6_tables: (C) 2000-2006 Netfilter Core Team

ERROR tr69_rut_wan6.c:2182 NOT found wan connection!
ERROR tr69_rut_wan6.c:2182 NOT found wan connection!
ERROR tr69_rut_wan6.c:2182 NOT found wan connection!
ERROR tr69_rut_wan6.c:2182 NOT found wan connection!
ERROR tr69_rut_wan6.c:2182 NOT found wan connection!
ERROR tr69_rut_wan6.c:2182 NOT found wan connection!
ssk:error:40.328:AEI_LanHostUpdateAssociatedDevice:235:enter mac Addr 6e:8b:30:b8:a8:a6,body->deleteHost=0,msg->src=5007,body->active=1
wlmngr:error:48.904:Aei_get_options_per_hw_version:2378:the AEI_options_per_HW_version is v1.1_c0000000 
wlmngr:error:48.951:Aei_wlmngr_qcsapi_command:347:Run Command set_security_defer_mode wifi0 1 Successful,ret=0
wlmngr:error:49.018:Aei_wlmngr_qcsapi_command:345:Run Command wifi_create_bss wifi0 Failure,ret=1
wlmngr:error:49.060:Aei_wlmngr_qcsapi_command:347:Run Command enable_interface wifi0 0 Successful,ret=0
wlmngr:error:50.644:Aei_wlmngr_qcsapi_command:347:Run Command wifi_create_bss wifi1 Successful,ret=0
wlmngr:error:50.724:Aei_wlmngr_qcsapi_command:347:Run Command enable_interface wifi1 0 Successful,ret=0
wlmngr:error:54.226:Aei_wlmngr_qcsapi_command:347:Run Command wifi_create_bss wifi2 Successful,ret=0
wlmngr:error:54.385:Aei_wlmngr_qcsapi_command:347:Run Command enable_interface wifi2 0 Successful,ret=0
wlmngr:error:56.324:Aei_wlmngr_qcsapi_command:347:Run Command wifi_create_bss wifi3 Successful,ret=0
wlmngr:error:56.510:Aei_wlmngr_qcsapi_command:347:Run Command enable_interface wifi3 0 Successful,ret=0
wlmngr:error:56.514:Aei_wlmngr_quantenna_doBasic:470:Quantenna WLAN Test:m_instance_wl[1].m_wlMssidVar[0].wlSsid = FibreOP787-5,enable=1
wlmngr:error:56.674:Aei_wlmngr_qcsapi_command:347:Run Command set_SSID wifi0 FibreOP787-5 Successful,ret=0
wlmngr:error:56.866:Aei_wlmngr_qcsapi_command:347:Run Command set_LED 1 0 wifi0 Successful,ret=0
wlmngr:error:57.087:Aei_wlmngr_qcsapi_command:347:Run Command set_option wifi0 SSID_broadcast 1 Successful,ret=0
wlmngr:error:57.087:Aei_wlmngr_quantenna_doBasic:470:Quantenna WLAN Test:m_instance_wl[1].m_wlMssidVar[1].wlSsid = FibreOP787-5-1,enable=0
wlmngr:error:57.087:Aei_wlmngr_quantenna_doBasic:470:Quantenna WLAN Test:m_instance_wl[1].m_wlMssidVar[2].wlSsid = FibreOP787-5-2,enable=0
wlmngr:error:57.087:Aei_wlmngr_quantenna_doBasic:470:Quantenna WLAN Test:m_instance_wl[1].m_wlMssidVar[3].wlSsid = FibreOP2787-5-IPTV,enable=1
wlmngr:error:57.166:Aei_wlmngr_qcsapi_command:347:Run Command set_SSID wifi3 FibreOP2787-5-IPTV Successful,ret=0
wlmngr:error:57.237:Aei_wlmngr_qcsapi_command:347:Run Command set_LED 1 0 wifi3 Successful,ret=0
wlmngr:error:57.315:Aei_wlmngr_qcsapi_command:347:Run Command set_option wifi3 SSID_broadcast 1 Successful,ret=0
wlmngr:error:57.315:Aei_wlmngr_quantenna_doSecurity:539:Quantenna WLAN Test:m_instance_wl[1].m_wlMssidVar[0].wlSsid = FibreOP787-5,enable=1
wlmngr:error:57.395:Aei_wlmngr_qcsapi_command:347:Run Command set_beacon wifi0 WPAand11i Successful,ret=0
wlmngr:error:57.476:Aei_wlmngr_qcsapi_command:347:Run Command set_WPA_encryption_modes wifi0 AESEncryption Successful,ret=0
wlmngr:error:58.544:Aei_wlmngr_qcsapi_command:347:Run Command set_key_passphrase wifi0 0 68X5Y8WM5YK2HKA9 Successful,ret=0
wlmngr:error:58.544:Aei_wlmngr_quantenna_doSecurity:539:Quantenna WLAN Test:m_instance_wl[1].m_wlMssidVar[1].wlSsid = FibreOP787-5-1,enable=0
wlmngr:error:58.544:Aei_wlmngr_quantenna_doSecurity:539:Quantenna WLAN Test:m_instance_wl[1].m_wlMssidVar[2].wlSsid = FibreOP787-5-2,enable=0
wlmngr:error:58.544:Aei_wlmngr_quantenna_doSecurity:539:Quantenna WLAN Test:m_instance_wl[1].m_wlMssidVar[3].wlSsid = FibreOP2787-5-IPTV,enable=1
wlmngr:error:58.638:Aei_wlmngr_qcsapi_command:347:Run Command set_beacon wifi3 WPAand11i Successful,ret=0
wlmngr:error:58.715:Aei_wlmngr_qcsapi_command:347:Run Command set_WPA_encryption_modes wifi3 AESEncryption Successful,ret=0
wlmngr:error:59.753:Aei_wlmngr_qcsapi_command:347:Run Command set_key_passphrase wifi3 0 54135434421533684767686743 Successful,ret=0
wlmngr:error:59.869:Aei_wlmngr_qcsapi_command:347:Run Command set_vht wifi0 1 Successful,ret=0
wlmngr:error:62.855:Aei_wlmngr_qcsapi_command:347:Run Command set_bw wifi0 80 Successful,ret=0
wlmngr:error:64.081:Aei_wlmngr_qcsapi_command:347:Run Command disable_dfs_channels wifi0 1 Successful,ret=0
wlmngr:error:64.248:Aei_wlmngr_qcsapi_command:347:Run Command set_chan_pri_inactive wifi0 153 0 Successful,ret=0
wlmngr:error:64.356:Aei_wlmngr_qcsapi_command:347:Run Command enable_scs wifi0 0 Successful,ret=0
wlmngr:error:64.433:Aei_wlmngr_qcsapi_command:347:Run Command set_channel wifi0 157 Successful,ret=0
wlmngr:error:64.515:Aei_wlmngr_qcsapi_command:347:Run Command set_option wifi0 autorate 1 Successful,ret=0
wlmngr:error:64.698:Aei_wlmngr_qcsapi_command:347:Run Command clear_mac_filters wifi0 Successful,ret=0
wlmngr:error:65.774:Aei_wlmngr_qcsapi_command:347:Run Command set_macaddr_filter wifi0 0 Successful,ret=0
wlmngr:error:65.878:Aei_wlmngr_qcsapi_command:347:Run Command clear_mac_filters wifi1 Successful,ret=0
wlmngr:error:66.923:Aei_wlmngr_qcsapi_command:347:Run Command set_macaddr_filter wifi1 0 Successful,ret=0
wlmngr:error:67.015:Aei_wlmngr_qcsapi_command:347:Run Command clear_mac_filters wifi2 Successful,ret=0
wlmngr:error:68.063:Aei_wlmngr_qcsapi_command:347:Run Command set_macaddr_filter wifi2 0 Successful,ret=0
wlmngr:error:68.158:Aei_wlmngr_qcsapi_command:347:Run Command clear_mac_filters wifi3 Successful,ret=0
wlmngr:error:69.208:Aei_wlmngr_qcsapi_command:347:Run Command set_macaddr_filter wifi3 0 Successful,ret=0
wlmngr:error:69.295:Aei_wlmngr_qcsapi_command:347:Run Command set_priority wifi0 0 Successful,ret=0
wlmngr:error:69.380:Aei_wlmngr_qcsapi_command:347:Run Command set_priority wifi1 0 Successful,ret=0
wlmngr:error:69.465:Aei_wlmngr_qcsapi_command:347:Run Command set_priority wifi2 0 Successful,ret=0
wlmngr:error:69.550:Aei_wlmngr_qcsapi_command:347:Run Command set_priority wifi3 3 Successful,ret=0
wlmngr:error:69.628:Aei_wlmngr_qcsapi_command:347:Run Command set_dscp_ac_map wifi3 22 2 Successful,ret=0
wlmngr:error:69.815:Aei_wlmngr_qcsapi_command:347:Run Command enable_interface wifi0 1 Successful,ret=0
wlmngr:error:69.894:Aei_wlmngr_qcsapi_command:347:Run Command enable_interface wifi1 0 Successful,ret=0
wlmngr:error:69.970:Aei_wlmngr_qcsapi_command:347:Run Command enable_interface wifi2 0 Successful,ret=0
wlmngr:error:70.074:Aei_wlmngr_qcsapi_command:347:Run Command enable_interface wifi3 1 Successful,ret=0
wlmngr:error:71.224:Aei_wlmngr_qcsapi_command:347:Run Command set_wps_param wifi3 ap_setup_locked 1 Successful,ret=0
wlmngr:error:72.350:Aei_wlmngr_qcsapi_command:347:Run Command apply_security_config wifi0 Successful,ret=0
wlmngr:error:72.428:Aei_wlmngr_qcsapi_command:347:Run Command set_security_defer_mode wifi0 0 Successful,ret=0
< SES_LED_OFF >

aei_qcsapi_create success
<WPS_STOP>
< SES_LED_OFF >

ifconfig: ioctl 0x8913 failed: No such device
interface wl1 does not exist!
interface wl1 does not exist!
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: SIOCSIFADDR: No such device
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
ifconfig: ioctl 0x8913 failed: No such device
interface wl1.3 does not exist!
interface wl1.3 does not exist!
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: SIOCSIFADDR: No such device
wlctl: wl driver adapter not found